10 lines
3.9 KiB
JSON
10 lines
3.9 KiB
JSON
{
|
|
"prompt": "Use case: precise-object-edit.\nAsset type: one transparent top-down game spacecraft sprite, DSHP24G2_PIC, original24x40 canvas.\nInput1 is the EXISTING V2 HD MASTER and the edit target. Input2 and input3 are the same complete authentic original sprite, respectively nearest-neighbor enlarged and native. They support the five small source-backed local corrections, not a whole design redraw.\nChange only the lower central black shaft termination and the four colored navigation-marker contacts at the outer side edges. Keep the existing upper and middle body, side plates, teal rings, pale damaged center cross, hardware, framing, materials and position unchanged.\nThe lower black shaft is a blunt flat-ended attached metal stub in the original, not a pointed spear. In the target, its final part tapers into a sharp point and narrows the authentic dark body. Correct only that final taper: retain its attached upper stem, make its two lower sides nearly parallel and its final face flat and wide like the original. At original24x40 coordinates, the final solid near-black section occupies x9..14 across y36..38; row39 is empty. Keep the source's little surrounding shoulders above that section and the empty margins beside and below it. Use a quiet near-black metal surface with restrained fine wear, no silver knife edge, bright outline, extra weapon, new frame, open hole, detached cap or appendage past the source end. Do not lengthen the sprite or paint into the final empty row.\nThe authentic original has four small opaque colored navigation-marker squares that meet the left and right canvas boundaries: green at(0,3) and(0,23), red at(23,3) and(23,23). The corresponding colored caps already exist in the master but their edge contact is recessed/feathered, causing the original complete marker positions to disappear when reduced. Correct only those small colored cap contacts so the green/red squares touch the original full left/right frame boundaries at those same heights and retain their full source-sized face. Keep them matte green/red like the source, fully painted opaque material, not tiny glowing centers, diffused halos, thin slivers, shifted inboard brown caps, enlarged surrounding blocks or generic new lights. Preserve all four distinct positions and the original one-cell proportions; do not add a stripe or connect the four lamps.\nReturn the whole same971x1619 transparent portrait master, with its existing logical24x40/origin0 layout and locked native crop[1,0,969,1615] unchanged. The original canvas is the entire frame, including its edge contacts and empty final row. No rescaling, recentering, crop, new padding, perspective, new background, labels, checkerboard, collage, glow, exterior shadow or broad material repaint. Preserve transparency everywhere outside the authentic corrected body/contact shapes. Do not replace the master with the source redraw or use another generated design.\nPrecise frame-boundary clarification: source coordinates refer to the locked logical crop, not to the discarded faint outer PNG fringe. Keep the raw first column x0 and bottom four rows y1615..1618 as they are. The corrected source markers meet the left/right boundaries of crop[1,0,969,1615], inside that crop, without adding opaque pigment to its excluded raw margins. The flat shaft ends by logical row38, leaving logical row39 transparent. No metadata/crop change.\n",
|
|
"referenced_image_paths": [
|
|
"/home/quintine/Projects/RaptorReplica/data/hd/jobs/enemies-200bf-200bf/generated/raw-v2.png",
|
|
"/home/quintine/Projects/RaptorReplica/RustRaptor/.reference/hd-campaign200bf-v2-master-flat-shaft-and-four-navmarkers-source-history-preflight-20261014-v1/original-references/200bf-authentic-wholeNN16.png",
|
|
"/home/quintine/Projects/RaptorReplica/RustRaptor/.reference/hd-campaign200bf-v2-master-flat-shaft-and-four-navmarkers-source-history-preflight-20261014-v1/original-references/200bf-authentic-native24x40.png"
|
|
],
|
|
"transparent_background": true
|
|
}
|