From 098700934e645bfceea0899fac108569fc3cb699 Mon Sep 17 00:00:00 2001
From: pi <pi@mainsailos-ea82228>
Date: Mon, 21 Apr 2025 12:39:04 +1000
Subject: [PATCH] m_m106_adjust.cfg modified - 21/04/25 - 12:39:00

---
 .../config/~UNUSED~/m_m106_adjust.cfg         | 53 -------------------
 1 file changed, 53 deletions(-)
 delete mode 100644 printer_data/config/~UNUSED~/m_m106_adjust.cfg

diff --git a/printer_data/config/~UNUSED~/m_m106_adjust.cfg b/printer_data/config/~UNUSED~/m_m106_adjust.cfg
deleted file mode 100644
index 425053f..0000000
--- a/printer_data/config/~UNUSED~/m_m106_adjust.cfg
+++ /dev/null
@@ -1,53 +0,0 @@
-[gcode_macro M106]
-rename_existing: G106
-description: Compresses fan speeds into 10–30% range if bed temp ≥ 70°C
-
-# === OVERVIEW ===
-# This macro overrides the default M106 behavior to apply a thermal-aware fan speed limiter.
-# When the bed temperature is at or above 70°C, it compresses the part cooling fan speed range
-# into a safer 10–30% range (i.e., 26–76 PWM) to reduce warping or delamination in high-temp materials.
-#
-# === WHY USE THIS ===
-# - Prevents excessive part cooling when printing materials like ABS, ASA, or PC.
-# - Helps maintain stable chamber temperatures and reduce thermal shock.
-# - Minimizes curling or layer splitting due to sudden cooling on hot beds.
-#
-# === HOW TO USE ===
-# Simply use M106 S<value> as usual in your G-code or slicer.
-# The macro will automatically adjust the fan speed if needed based on bed temperature.
-#
-# === NOTES ===
-# - This logic only applies when the bed temperature is 70°C or higher.
-# - Below 70°C, full-range fan control is allowed.
-# - You can customize the input/output compression range if needed.
-
-# === PARAMETERS ===
-#   S: Standard fan speed in 0–255 (required by M106)
-
-# Internal constants:
-#   min_input  = 26  (10% of 255)
-#   max_input  = 255 (100%)
-#   min_output = 26  (10%)
-#   max_output = 76  (30%)
-
-gcode:
-    {% set fan_speed = params.S|default(0)|int %}
-    {% set bed_temp = printer["heater_bed"].temperature %}
-    {% set min_input = 26 %}
-    {% set max_input = 255 %}
-    {% set min_output = 26 %}
-    {% set max_output = 76 %}
-
-    {% if bed_temp >= 70 %}
-        # If below threshold, limit fan to the lower compressed range (10–30%)
-        {% if fan_speed < min_input %}
-            {% set compressed_speed = min_output %}
-        {% else %}
-            {% set compressed_speed = (min_output + ((fan_speed - min_input) * (max_output - min_output) / (max_input - min_input)))|int %}
-        {% endif %}
-        G106 S{compressed_speed}
-    {% else %}
-        # Below threshold, allow full fan speed as requested
-        G106 S{fan_speed}
-    {% endif %}
-