printer.cfg modified - 23/04/25 - 16:39:16

printer_data/config/printer.cfg

@@ -98,8 +98,13 @@ gcode:
     M106 S0
     G1 Z5 F3000                    ; move nozzle up 5mm
     G90                            ; absolute positioning
-    BED_MESH_CLEAR
-    SET_PIN PIN=daylight VALUE=0.0
+
+    {% if not printer["gcode_macro SMART_DAYLIGHT"].smart_daylight_enabled %}
+        SET_PIN PIN=daylight VALUE=0
+        SET_GCODE_VARIABLE MACRO=SMART_DAYLIGHT VARIABLE=last_brightness VALUE=0.0
+        RESPOND MSG="🌙 SMART_DAYLIGHT not active — lights turned off and state reset"
+    {% endif %}
+
     
 
 #*# <---------------------- SAVE_CONFIG ---------------------->