diff --git a/printer_data/config/printer.cfg b/printer_data/config/printer.cfg
index 088edba..1bdcced 100644
--- a/printer_data/config/printer.cfg
+++ b/printer_data/config/printer.cfg
@@ -452,102 +452,6 @@ gcode:
     STATUS_READY
     #--------------------------------------------------------------------
 
-[gcode_macro FAST_CALIBRATE]
-description: >
-  Quickly home axis and mesh the print area.
-  • Caps nozzle temp at 150 °C (warns if over‑requested)  
-  • Heats bed & nozzle, non‑blocking wait (via WAIT_HEAT_ALL)  
-  • Clears old mesh, homes, then runs adaptive mesh  
-  • Moves to center & probes, with step‑by‑step logs
-gcode:
-    # ─── STEP 1: Read & Cap Requested Temps ─────────────────────────── #
-    {% set extruder_req = params.EXTRUDER|default(0)|int %}
-    {% set bed_req      = params.BED     |default(0)|int %}
-    {% if extruder_req > 150 %}
-        {% set capped_extruder = 150 %}
-        {% set warn_msg = "⚠️ Nozzle temp request " ~ extruder_req|string ~ "°C capped to " ~ capped_extruder|string ~ "°C" %}
-        RESPOND MSG="{warn_msg}"
-    {% else %}
-        {% set capped_extruder = extruder_req %}
-    {% endif %}
-
-    # ─── STEP 2: Status Overview ──────────────────────────────────────── #
-    {% set status_msg = 
-        "⚙️ Fast Calibrate Starting | Bed → " ~ bed_req|string ~ "°C" ~ " | Nozzle → " ~ capped_extruder|string ~ "°C" %}
-    RESPOND MSG="{status_msg}"
-
-    # ─── STEP 3: Begin Heating Heaters ───────────────────────────────── #
-    {% if capped_extruder > 0 %}
-        {% set heat_nozzle_msg = "🔥 Heating nozzle to " ~ capped_extruder|string ~ "°C" %}
-        RESPOND MSG="{heat_nozzle_msg}"
-        M104 S{capped_extruder}
-    {% else %}
-        RESPOND MSG="ℹ️ Nozzle heating skipped (0°C requested)"
-    {% endif %}
-
-    {% if bed_req > 0 %}
-        {% set heat_bed_msg = "🔥 Heating bed to " ~ bed_req|string ~ "°C" %}
-        RESPOND MSG="{heat_bed_msg}"
-        M140 S{bed_req}
-    {% else %}
-        RESPOND MSG="ℹ️ Bed heating skipped (0°C requested)"
-    {% endif %}
-
-    # ─── STEP 4: Non‑blocking Wait for Both Temps ─────────────────────── #
-    WAIT_HEAT_ALL
-
-    # ─── STEP 5: Clear Mesh & Home Axes ───────────────────────────────── #
-    RESPOND MSG="🧹 Clearing old mesh"
-    BED_MESH_CLEAR
-
-    RESPOND MSG="🏠 Homing all axes"
-    _CG28
-
-    {% if printer.quad_gantry_level.applied|lower == 'false' %}
-        RESPOND MSG="📏 Running quad gantry level"
-        STATUS_LEVELING
-        QUAD_GANTRY_LEVEL
-    {% else %}
-        RESPOND MSG="✔️ Gantry already leveled"
-    {% endif %}
-
-    # ─── STEP 6: Adaptive Mesh Scan ──────────────────────────────────── #
-    RESPOND MSG="🔍 Starting adaptive mesh scan"
-    STATUS_MESHING
-    BED_MESH_CALIBRATE ADAPTIVE=1
-
-    # ─── STEP 7: Final Probe Touch ───────────────────────────────────── #
-    RESPOND MSG="📍 Moving to center for probe touch"
-    G1 X{ printer.toolhead.axis_maximum.x/2 } Y{ printer.toolhead.axis_maximum.y/2 } F4500
-    CARTOGRAPHER_TOUCH
-
-    # ─── STEP 8: Restore original nozzle temp & wait ────────────────── #
-    {% if extruder_req > 0 %}
-        {% set restore_msg = "🔁 Restoring nozzle temp to " ~ extruder_req|string ~ "°C" %}
-        RESPOND MSG="{restore_msg}"
-        M104 S{extruder_req}
-        WAIT_HEAT_EXTRUDER
-    {% endif %}
-
-    RESPOND MSG="✅ Fast calibration complete"
-
-
-[gcode_macro WAIT_HEAT_ALL]
-description: Wait for bed and nozzle to reach target temps
-gcode:
-    RESPOND MSG="⏳ Waiting for bed and nozzle to heat..."
-    M190 S{printer.heater_bed.target}
-    M109 S{printer.extruder.target}
-    RESPOND MSG="🔥 Bed and nozzle ready."
-
-[gcode_macro WAIT_HEAT_EXTRUDER]
-description: Wait for nozzle to reach target temps
-gcode:
-    RESPOND MSG="⏳ Waiting for nozzle to heat..."
-    M109 S{printer.extruder.target}
-    RESPOND MSG="🔥 Nozzle ready."
-
-
 [gcode_macro PRINT_START]
 #   Use PRINT_START for the slicer starting script - please customise for your slicer of choice
 gcode: