printer_macros.cfg modified - 23/04/25 - 16:39:52

printer_data/config/SYSTEM/printer_macros.cfg

@@ -0,0 +1,48 @@
+#####################################################################
+# 	Macros
+#####################################################################
+
+
+[gcode_macro G32]
+description: Home XYZ mesh calibrate
+gcode:
+    STATUS_HOMING
+    BED_MESH_CLEAR
+    G28
+    QUAD_GANTRY_LEVEL
+    STATUS_MESHING
+    BED_MESH_CALIBRATE
+    G1 X{ printer.toolhead.axis_maximum.x/2 } Y{ printer.toolhead.axis_maximum.y/2 } Z30 F4500
+    CARTOGRAPHER_TOUCH
+    STATUS_READY
+    #--------------------------------------------------------------------
+
+[gcode_macro PRINT_START]
+#   Use PRINT_START for the slicer starting script - please customise for your slicer of choice
+gcode:
+    RESPOND MSG="🚦 Waiting for bed/chamber readiness..."
+    SET_MATERIAL {rawparams}
+    FAST_CALIBRATE {rawparams}
+    CLEAN_NOZZLE
+    STATUS_PRINTING
+    LINE_PURGE
+   
+[gcode_macro PRINT_END]
+#   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
+gcode:
+    M400                           ; wait for buffer to clear
+    G92 E0                         ; zero the extruder
+    G1 E-10.0 F3600                ; retract filament
+    G91                            ; relative positioning
+    G0 Z1.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
+    TURN_OFF_HEATERS
+    M107                           ; turn off fan
+    M106 S0
+    G1 Z5 F3000                    ; move nozzle up 5mm
+    G90                            ; absolute positioning
+
+    {% if not printer["gcode_macro SMART_DAYLIGHT"].smart_daylight_enabled %}
+        SET_PIN PIN=daylight VALUE=0
+        SET_GCODE_VARIABLE MACRO=SMART_DAYLIGHT VARIABLE=last_brightness VALUE=0.0
+        RESPOND MSG="🌙 SMART_DAYLIGHT not active — lights turned off and state reset"
+    {% endif %}