From 8d93086aaaf233b18b72f3dd0b6bc0027502fb0a Mon Sep 17 00:00:00 2001
From: pi <pi@mainsailos-ea82228>
Date: Fri, 18 Apr 2025 09:39:47 +0100
Subject: [PATCH] set_material.cfg modified - 18/04/25 - 09:39:44

---
 printer_data/config/CUSTOM/set_material.cfg | 105 --------------------
 1 file changed, 105 deletions(-)

diff --git a/printer_data/config/CUSTOM/set_material.cfg b/printer_data/config/CUSTOM/set_material.cfg
index f66d870..4afe9d6 100644
--- a/printer_data/config/CUSTOM/set_material.cfg
+++ b/printer_data/config/CUSTOM/set_material.cfg
@@ -471,108 +471,3 @@ gcode:
     {% endif %}
 
 
-[gcode_macro SET_CHAMBER_HEAT]
-description: Modular chamber heating logic with active/passive support, includes safety checks and debug output
-
-# === OVERVIEW ===
-# This macro heats the chamber to a target temperature using either:
-# 1. An active heater (like a dedicated chamber heater), or
-# 2. Passive heating (using the bed heater).
-# It controls the bed heater, an optional chamber heater, and a circulation fan.
-# It will block until the target temperature is reached.
-
-# === SAFETY WARNINGS ===
-# - Ensure your chamber temperature sensor is correctly installed and reporting.
-# - Watch your printer during the first few uses of this macro.
-# - Passive mode may take a long time to reach temperature.
-# - Don't overheat your enclosure — check max safe temps for your printer!
-
-# === PARAMETERS ===
-# TARGET      : (required) Target chamber temperature in °C.
-# SENSOR      : (optional) Temperature sensor name (default: temperature_sensor chamber_combined_mean).
-# HEATER      : (optional) Chamber heater name (used only if ACTIVE=True).
-# BED_HEATER  : (optional) Bed heater name (default: heater_bed).
-# FAN         : (optional) Circulation fan name (default: nevermore_fan).
-# ACTIVE      : (optional) If True, uses a dedicated heater; otherwise uses passive heating.
-
-# === USAGE ===
-# SET_CHAMBER_HEAT TARGET=60 ACTIVE=True HEATER="heater_generic chamber_heater"
-# SET_CHAMBER_HEAT TARGET=60 ACTIVE=False
-
-# === OVERVIEW ===
-# Heats the chamber using:
-# 🔥 Active: Chamber heater + bed + fan
-# ❄️ Passive: Bed heater only
-# ✅ Blocks until desired temperature is reached
-
-gcode:
-    # === 🎛️ Parse Parameters ===
-    {% set target = params.TARGET|int %}
-    {% set sensor = params.SENSOR|default('temperature_sensor chamber_combined_mean') %}
-    {% set heater = params.HEATER|default('') %}
-    {% set bed_heater = params.BED_HEATER|default('heater_bed') %}
-    {% set bed_fan = params.FAN|default('nevermore_fan') %}
-    {% set active = params.ACTIVE|default("false")|lower == 'true' %}
-    {% set wait_temp = target if active else target - 25 %}
-
-    {% set msg = "🧰 [CHAMBER HEAT] Init | Target: " ~ target ~ "°C | Wait until: " ~ wait_temp ~ "°C | Mode: " ~ ("🔥 Active" if active else "❄️ Passive") %}
-    RESPOND MSG="{msg}"
-
-    M141 S{target}  # Set virtual chamber temp for slicers
-
-    # === 🔥 ACTIVE MODE ===
-    {% if active %}
-        {% set msg = "🔥 [CHAMBER HEAT] Enabling active mode: chamber heater + bed + fan at full speed!" %}
-        RESPOND MSG="{msg}"
-
-        {% if heater|length > 0 %}
-            {% set msg = "🛠️ [CHAMBER HEAT] Chamber heater '" ~ heater ~ "' → " ~ target|string ~ "°C" %}
-            RESPOND MSG="{msg}"
-            SET_HEATER_TEMPERATURE HEATER={heater} TARGET={target}
-        {% endif %}
-
-        {% set msg = "🛏️ [CHAMBER HEAT] Bed heater '" ~ bed_heater ~ "' → " ~ target|string ~ "°C (support heat)" %}
-        RESPOND MSG="{msg}"
-        SET_HEATER_TEMPERATURE HEATER={bed_heater} TARGET={target}
-
-        {% set msg = "🌀 [CHAMBER HEAT] Fan '" ~ bed_fan ~ "' → speed = 100%" %}
-        RESPOND MSG="{msg}"
-        SET_FAN_SPEED FAN={bed_fan} SPEED=1.0
-
-    # === ❄️ PASSIVE MODE ===
-    {% else %}
-        {% if printer[sensor].temperature < wait_temp %}
-            {% set msg = "❄️ [CHAMBER HEAT] Chamber is cool (" ~ printer[sensor].temperature|round(1) ~ "°C) — warming with bed only!" %}
-            RESPOND MSG="{msg}"
-
-            {% set msg = "🌀 [CHAMBER HEAT] Fan '" ~ bed_fan ~ "' → speed = 50% (gentle circulation)" %}
-            RESPOND MSG="{msg}"
-            SET_FAN_SPEED FAN={bed_fan} SPEED=0.5
-
-            {% set msg = "🛏️ [CHAMBER HEAT] Bed heater '" ~ bed_heater ~ "' → 120°C (passive heating boost)" %}
-            RESPOND MSG="{msg}"
-            SET_HEATER_TEMPERATURE HEATER={bed_heater} TARGET=120
-
-            {% set msg = "⏳ [CHAMBER HEAT] Waiting for bed to reach 120°C..." %}
-            RESPOND MSG="{msg}"
-            TEMPERATURE_WAIT SENSOR="{bed_heater}" MINIMUM=120
-
-        {% else %}
-            {% set msg = "✅ [CHAMBER HEAT] Chamber already warm (" ~ printer[sensor].temperature|round(1) ~ "°C), skipping passive heat!" %}
-            RESPOND MSG="{msg}"
-        {% endif %}
-
-        {% set msg = "🌀 [CHAMBER HEAT] Fan '" ~ bed_fan ~ "' → speed = 100%" %}
-        RESPOND MSG="{msg}"
-        SET_FAN_SPEED FAN={bed_fan} SPEED=1.0
-    {% endif %}
-
-    # === ⏳ FINAL BLOCKING WAIT ===
-    {% set msg = "⏳ [CHAMBER HEAT] Waiting for chamber sensor '" ~ sensor ~ "' ≥ " ~ wait_temp ~ "°C..." %}
-    RESPOND MSG="{msg}"
-    TEMPERATURE_WAIT SENSOR="{sensor}" MINIMUM={wait_temp}
-
-    {% set msg = "🎉 [CHAMBER HEAT] Chamber ready! Final temp: " ~ printer[sensor].temperature|round(1) ~ "°C" %}
-    RESPOND MSG="{msg}"
-
-