diff --git a/printer_data/config/printer.cfg b/printer_data/config/printer.cfg
index b5d3093..ece43c7 100644
--- a/printer_data/config/printer.cfg
+++ b/printer_data/config/printer.cfg
@@ -55,56 +55,6 @@ enable_force_move: True
 [firmware_retraction]
 [gcode_arcs]
 resolution: 0.1
-
-#####################################################################
-# 	Macros
-#####################################################################
-
-
-[gcode_macro G32]
-description: Home XYZ mesh calibrate
-gcode:
-    STATUS_HOMING
-    BED_MESH_CLEAR
-    G28
-    QUAD_GANTRY_LEVEL
-    STATUS_MESHING
-    BED_MESH_CALIBRATE
-    G1 X{ printer.toolhead.axis_maximum.x/2 } Y{ printer.toolhead.axis_maximum.y/2 } Z30 F4500
-    CARTOGRAPHER_TOUCH
-    STATUS_READY
-    #--------------------------------------------------------------------
-
-[gcode_macro PRINT_START]
-#   Use PRINT_START for the slicer starting script - please customise for your slicer of choice
-gcode:
-    RESPOND MSG="🚦 Waiting for bed/chamber readiness..."
-    SET_MATERIAL {rawparams}
-    FAST_CALIBRATE {rawparams}
-    CLEAN_NOZZLE
-    STATUS_PRINTING
-    LINE_PURGE
-   
-[gcode_macro PRINT_END]
-#   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
-gcode:
-    M400                           ; wait for buffer to clear
-    G92 E0                         ; zero the extruder
-    G1 E-10.0 F3600                ; retract filament
-    G91                            ; relative positioning
-    G0 Z1.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
-    TURN_OFF_HEATERS
-    M107                           ; turn off fan
-    M106 S0
-    G1 Z5 F3000                    ; move nozzle up 5mm
-    G90                            ; absolute positioning
-
-    {% if not printer["gcode_macro SMART_DAYLIGHT"].smart_daylight_enabled %}
-        SET_PIN PIN=daylight VALUE=0
-        SET_GCODE_VARIABLE MACRO=SMART_DAYLIGHT VARIABLE=last_brightness VALUE=0.0
-        RESPOND MSG="🌙 SMART_DAYLIGHT not active — lights turned off and state reset"
-    {% endif %}
-
     
 
 #*# <---------------------- SAVE_CONFIG ---------------------->