From d8d2c4990313a88c3e9634bf9bb59da7974882fa Mon Sep 17 00:00:00 2001
From: pi <pi@mainsailos-219c182>
Date: Thu, 17 Apr 2025 09:20:15 +0100
Subject: [PATCH] btt_eddy.cfg modified - 17/04/25 - 09:20:12

---
 printer_data/config/btt_eddy.cfg | 31 -------------------------------
 1 file changed, 31 deletions(-)
 delete mode 100644 printer_data/config/btt_eddy.cfg

diff --git a/printer_data/config/btt_eddy.cfg b/printer_data/config/btt_eddy.cfg
deleted file mode 100644
index 707f39d..0000000
--- a/printer_data/config/btt_eddy.cfg
+++ /dev/null
@@ -1,31 +0,0 @@
-
-[mcu eddy]
-serial: /dev/serial/by-id/usb-Klipper_rp2040_504450612086291C-if00 # This is the serial address of your eddy probe. This can be found by using the terminal of your klipper instance (typically through SSH) and using the command ```ls /dev/serial/by-id``` 
-restart_method: command
-
-[probe_eddy_ng btt_eddy]
-sensor_type: btt_eddy
-i2c_mcu: eddy
-i2c_bus: i2c0f
-x_offset: 0 # INSERT VALUE FOR YOUR PROBE POSITION
-y_offset: 36 # INSERT VALUE FOR YOUR PROBE POSITION 
-reg_drive_current: 15
-tap_target_z: -0.6
-tap_start_z: 3
-tap_mode: butter
-tap_threshold: 135
-tap_samples: 5
-tap_max_samples: 10
-tap_samples_stddev: 0.025
-tap_speed: 2
-tap_adjust_z: -0.225
-
-[temperature_sensor btt_eddy_mcu]
-sensor_type: temperature_mcu
-sensor_mcu: eddy
-min_temp: 10
-max_temp: 100
-
-[temperature_sensor btt_eddy]
-sensor_type: Generic 3950
-sensor_pin: eddy:gpio26
\ No newline at end of file