c_stealthburner_leds.cfg modified - 23/04/25 - 23:31:49
This commit is contained in:
pi committed
1 parent
4ebe48b19f
commit
e6c658d270
1 file changed
+253
-253
@@ -1,254 +1,254 @@
|
|||||||
# Macros for setting the status leds on the Voron StealthBurner toolhead (or for any neopixel-type leds).
|
# Macros for setting the status leds on the Voron StealthBurner toolhead (or for any neopixel-type leds).
|
||||||
#
|
#
|
||||||
# You will need to configure a neopixel (or other addressable led, such as dotstar). See
|
# You will need to configure a neopixel (or other addressable led, such as dotstar). See
|
||||||
# https://www.klipper3d.org/Config_Reference.html#neopixel for configuration details.
|
# https://www.klipper3d.org/Config_Reference.html#neopixel for configuration details.
|
||||||
|
|
||||||
|
|
||||||
#####################################
|
#####################################
|
||||||
# INSTRUCTIONS #
|
# INSTRUCTIONS #
|
||||||
#####################################
|
#####################################
|
||||||
# How to use all this stuff:
|
# How to use all this stuff:
|
||||||
#
|
#
|
||||||
# 1. Copy this .cfg file into your Klipper config directory and then add [include stealthburner_leds.cfg]
|
# 1. Copy this .cfg file into your Klipper config directory and then add [include stealthburner_leds.cfg]
|
||||||
# to the top of your printer.cfg in order to register the LEDs and macros with Klipper.
|
# to the top of your printer.cfg in order to register the LEDs and macros with Klipper.
|
||||||
# 2. Define your LEDs by editing [neopixel sb_leds] below and entering the data pin from your control board
|
# 2. Define your LEDs by editing [neopixel sb_leds] below and entering the data pin from your control board
|
||||||
# as well as the color order.
|
# as well as the color order.
|
||||||
#
|
#
|
||||||
# Note: RGB and RGBW are different and must be defined explicitly. RGB and RGBW are also not able to
|
# Note: RGB and RGBW are different and must be defined explicitly. RGB and RGBW are also not able to
|
||||||
# be mix-and-matched in the same chain. A separate data line would be needed for proper functioning.
|
# be mix-and-matched in the same chain. A separate data line would be needed for proper functioning.
|
||||||
#
|
#
|
||||||
# RGBW LEDs will have a visible yellow-ish phosphor section to the chip. If your LEDs do not have
|
# RGBW LEDs will have a visible yellow-ish phosphor section to the chip. If your LEDs do not have
|
||||||
# this yellow portion, you have RGB LEDs.
|
# this yellow portion, you have RGB LEDs.
|
||||||
#
|
#
|
||||||
# 3. Save your config and restart Klipper.
|
# 3. Save your config and restart Klipper.
|
||||||
#
|
#
|
||||||
# Note: We set RED and BLUE to 1.0 to make it easier for users and supporters to detect
|
# Note: We set RED and BLUE to 1.0 to make it easier for users and supporters to detect
|
||||||
# misconfigurations or miswiring. The default color format is for Neopixels with a dedicated
|
# misconfigurations or miswiring. The default color format is for Neopixels with a dedicated
|
||||||
# white LED. On startup, all three SB LEDs should light up.
|
# white LED. On startup, all three SB LEDs should light up.
|
||||||
#
|
#
|
||||||
# If you get random colors across your LEDs, change the color_order to GRB and restart. Then
|
# If you get random colors across your LEDs, change the color_order to GRB and restart. Then
|
||||||
# omit the W for each suggested color_order in the next paragraph.
|
# omit the W for each suggested color_order in the next paragraph.
|
||||||
#
|
#
|
||||||
# If you get MAGENTA, your color order is correct. If you get CYAN, you need to use RGBW. If
|
# If you get MAGENTA, your color order is correct. If you get CYAN, you need to use RGBW. If
|
||||||
# you get YELLOW, you need to use BRGW (note that BRG is only supported in the latest Klipper
|
# you get YELLOW, you need to use BRGW (note that BRG is only supported in the latest Klipper
|
||||||
# version).
|
# version).
|
||||||
#
|
#
|
||||||
# 4. Once you have confirmed that the LEDs are set up correctly, you must now decide where you want
|
# 4. Once you have confirmed that the LEDs are set up correctly, you must now decide where you want
|
||||||
# these macros called up...which means adding them to your existing gcode macros. NOTHING will happen
|
# these macros called up...which means adding them to your existing gcode macros. NOTHING will happen
|
||||||
# unless you add the STATUS_????? macros to your existing gcode macros.
|
# unless you add the STATUS_????? macros to your existing gcode macros.
|
||||||
#
|
#
|
||||||
# Example: add STATUS_LEVELING to the beginning of your QGL gcode macro, and then add STATUS_READY
|
# Example: add STATUS_LEVELING to the beginning of your QGL gcode macro, and then add STATUS_READY
|
||||||
# to the end of it to set the logo LED and nozzle LEDs back to the `ready` state.
|
# to the end of it to set the logo LED and nozzle LEDs back to the `ready` state.
|
||||||
#
|
#
|
||||||
# Example: add STATUS_CLEANING to the beginning of your nozzle-cleaning macro, and then STATUS_READY
|
# Example: add STATUS_CLEANING to the beginning of your nozzle-cleaning macro, and then STATUS_READY
|
||||||
# to the end of it to return the LEDs back to `ready` state.
|
# to the end of it to return the LEDs back to `ready` state.
|
||||||
#
|
#
|
||||||
# 5. Feel free to change colors of each macro, create new ones if you have a need to. The macros provided below
|
# 5. Feel free to change colors of each macro, create new ones if you have a need to. The macros provided below
|
||||||
# are just an example of what is possible. If you want to try some more complex animations, you will most
|
# are just an example of what is possible. If you want to try some more complex animations, you will most
|
||||||
# likely have to use WLED with Moonraker and a small micro-controller
|
# likely have to use WLED with Moonraker and a small micro-controller
|
||||||
#
|
#
|
||||||
#####################################
|
#####################################
|
||||||
# END INSTRUCTRUCTIONS #
|
# END INSTRUCTRUCTIONS #
|
||||||
#####################################
|
#####################################
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
[neopixel sb_leds]
|
[neopixel sb_leds]
|
||||||
pin: EBB:gpio15
|
pin: EBB:gpio15
|
||||||
# The pin connected to the neopixel. This parameter must be provided.
|
# The pin connected to the neopixel. This parameter must be provided.
|
||||||
chain_count: 3
|
chain_count: 3
|
||||||
# The number of Neopixel chips that are "daisy chained" to the
|
# The number of Neopixel chips that are "daisy chained" to the
|
||||||
# provided pin. The default is 1 (which indicates only a single
|
# provided pin. The default is 1 (which indicates only a single
|
||||||
# Neopixel is connected to the pin).
|
# Neopixel is connected to the pin).
|
||||||
color_order: GRBW
|
color_order: GRBW
|
||||||
# Set the pixel order required by the LED hardware. Options are GRB,
|
# Set the pixel order required by the LED hardware. Options are GRB,
|
||||||
# RGB, GRBW, or RGBW. The default is GRB.
|
# RGB, GRBW, or RGBW. The default is GRB.
|
||||||
initial_RED: 1.0
|
initial_RED: 1.0
|
||||||
initial_GREEN: 0.0
|
initial_GREEN: 0.0
|
||||||
initial_BLUE: 1.0
|
initial_BLUE: 1.0
|
||||||
initial_WHITE: 0.0
|
initial_WHITE: 0.0
|
||||||
# Sets the initial LED color of the Neopixel. Each value should be
|
# Sets the initial LED color of the Neopixel. Each value should be
|
||||||
# between 0.0 and 1.0. The WHITE option is only available on RGBW
|
# between 0.0 and 1.0. The WHITE option is only available on RGBW
|
||||||
# LEDs. The default for each color is 0.#
|
# LEDs. The default for each color is 0.#
|
||||||
|
|
||||||
# Most configuration for the macros can be done by modifying the variables in the _sb_vars macro
|
# Most configuration for the macros can be done by modifying the variables in the _sb_vars macro
|
||||||
# at the start of this file.
|
# at the start of this file.
|
||||||
|
|
||||||
##########
|
##########
|
||||||
# MACROS #
|
# MACROS #
|
||||||
##########
|
##########
|
||||||
|
|
||||||
# The following status macros are available (these go inside of your macros):
|
# The following status macros are available (these go inside of your macros):
|
||||||
#
|
#
|
||||||
# STATUS_READY
|
# STATUS_READY
|
||||||
# STATUS_OFF
|
# STATUS_OFF
|
||||||
# STATUS_BUSY
|
# STATUS_BUSY
|
||||||
# STATUS_HEATING
|
# STATUS_HEATING
|
||||||
# STATUS_LEVELING
|
# STATUS_LEVELING
|
||||||
# STATUS_HOMING
|
# STATUS_HOMING
|
||||||
# STATUS_CLEANING
|
# STATUS_CLEANING
|
||||||
# STATUS_MESHING
|
# STATUS_MESHING
|
||||||
# STATUS_CALIBRATING_Z
|
# STATUS_CALIBRATING_Z
|
||||||
#
|
#
|
||||||
# With additional macros for basic control:
|
# With additional macros for basic control:
|
||||||
#
|
#
|
||||||
# SET_NOZZLE_LEDS_ON
|
# SET_NOZZLE_LEDS_ON
|
||||||
# SET_LOGO_LEDS_OFF
|
# SET_LOGO_LEDS_OFF
|
||||||
# SET_NOZZLE_LEDS_OFF
|
# SET_NOZZLE_LEDS_OFF
|
||||||
#
|
#
|
||||||
# Contributed by Voron discord users wile.e, Tetsunosuke, and etherwalker
|
# Contributed by Voron discord users wile.e, Tetsunosuke, and etherwalker
|
||||||
|
|
||||||
|
|
||||||
[gcode_macro _sb_vars]
|
[gcode_macro _sb_vars]
|
||||||
# User settings for the StealthBurner status leds. You can change the status colors and led
|
# User settings for the StealthBurner status leds. You can change the status colors and led
|
||||||
# configurations for the logo and nozzle here.
|
# configurations for the logo and nozzle here.
|
||||||
variable_colors: {
|
variable_colors: {
|
||||||
'logo': { # Colors for logo states
|
'logo': { # Colors for logo states
|
||||||
'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
||||||
'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
|
'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
|
||||||
'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
|
'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
|
||||||
'heating': {'r': 0.3, 'g': 0.18, 'b': 0.0, 'w': 0.0},
|
'heating': {'r': 0.3, 'g': 0.18, 'b': 0.0, 'w': 0.0},
|
||||||
'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
|
'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
|
||||||
'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
|
'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
|
||||||
'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
|
'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
|
||||||
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
||||||
'printing': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
'printing': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
||||||
'standby': {'r': 0.01, 'g': 0.01, 'b': 0.01, 'w': 0.1},
|
'standby': {'r': 0.01, 'g': 0.01, 'b': 0.01, 'w': 0.1},
|
||||||
},
|
},
|
||||||
'nozzle': { # Colors for nozzle states
|
'nozzle': { # Colors for nozzle states
|
||||||
'heating': {'r': 0.8, 'g': 0.35, 'b': 0.0, 'w':0.0},
|
'heating': {'r': 0.8, 'g': 0.35, 'b': 0.0, 'w':0.0},
|
||||||
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
||||||
'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
|
'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':0.1},
|
||||||
'standby': {'r': 0.6, 'g': 0.0, 'b': 0.0, 'w':0.0},
|
'standby': {'r': 0.6, 'g': 0.0, 'b': 0.0, 'w':0.0},
|
||||||
},
|
},
|
||||||
'thermal': {
|
'thermal': {
|
||||||
'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
||||||
'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
|
'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
variable_logo_led_name: "sb_leds"
|
variable_logo_led_name: "sb_leds"
|
||||||
# The name of the addressable LED chain that contains the logo LED(s)
|
# The name of the addressable LED chain that contains the logo LED(s)
|
||||||
variable_logo_idx: "1"
|
variable_logo_idx: "1"
|
||||||
# A comma-separated list of indexes LEDs in the logo
|
# A comma-separated list of indexes LEDs in the logo
|
||||||
variable_nozzle_led_name: "sb_leds"
|
variable_nozzle_led_name: "sb_leds"
|
||||||
# The name of the addressable LED chain that contains the nozzle LED(s). This will
|
# The name of the addressable LED chain that contains the nozzle LED(s). This will
|
||||||
# typically be the same LED chain as the logo.
|
# typically be the same LED chain as the logo.
|
||||||
variable_nozzle_idx: "2,3"
|
variable_nozzle_idx: "2,3"
|
||||||
# A comma-separated list of indexes of LEDs in the nozzle
|
# A comma-separated list of indexes of LEDs in the nozzle
|
||||||
gcode:
|
gcode:
|
||||||
# This section is required. Do Not Delete.
|
# This section is required. Do Not Delete.
|
||||||
|
|
||||||
[gcode_macro _set_sb_leds]
|
[gcode_macro _set_sb_leds]
|
||||||
gcode:
|
gcode:
|
||||||
{% set red = params.RED|default(0)|float %}
|
{% set red = params.RED|default(0)|float %}
|
||||||
{% set green = params.GREEN|default(0)|float %}
|
{% set green = params.GREEN|default(0)|float %}
|
||||||
{% set blue = params.BLUE|default(0)|float %}
|
{% set blue = params.BLUE|default(0)|float %}
|
||||||
{% set white = params.WHITE|default(0)|float %}
|
{% set white = params.WHITE|default(0)|float %}
|
||||||
{% set led = params.LED|string %}
|
{% set led = params.LED|string %}
|
||||||
{% set idx = (params.IDX|string).split(',') %}
|
{% set idx = (params.IDX|string).split(',') %}
|
||||||
{% set transmit_last = params.TRANSMIT|default(1) %}
|
{% set transmit_last = params.TRANSMIT|default(1) %}
|
||||||
|
|
||||||
{% for led_index in idx %}
|
{% for led_index in idx %}
|
||||||
{% set transmit=transmit_last if loop.last else 0 %}
|
{% set transmit=transmit_last if loop.last else 0 %}
|
||||||
set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
|
set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
|
||||||
{% endfor %}
|
{% endfor %}
|
||||||
|
|
||||||
[gcode_macro _set_sb_leds_by_name]
|
[gcode_macro _set_sb_leds_by_name]
|
||||||
gcode:
|
gcode:
|
||||||
{% set leds_name = params.LEDS %}
|
{% set leds_name = params.LEDS %}
|
||||||
{% set color_name = params.COLOR %}
|
{% set color_name = params.COLOR %}
|
||||||
{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
|
{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
|
||||||
{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
|
{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
|
||||||
{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
|
{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
|
||||||
{% set transmit = params.TRANSMIT|default(1) %}
|
{% set transmit = params.TRANSMIT|default(1) %}
|
||||||
|
|
||||||
_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}
|
_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}
|
||||||
|
|
||||||
[gcode_macro _set_logo_leds]
|
[gcode_macro _set_logo_leds]
|
||||||
gcode:
|
gcode:
|
||||||
{% set red = params.RED|default(0)|float %}
|
{% set red = params.RED|default(0)|float %}
|
||||||
{% set green = params.GREEN|default(0)|float %}
|
{% set green = params.GREEN|default(0)|float %}
|
||||||
{% set blue = params.BLUE|default(0)|float %}
|
{% set blue = params.BLUE|default(0)|float %}
|
||||||
{% set white = params.WHITE|default(0)|float %}
|
{% set white = params.WHITE|default(0)|float %}
|
||||||
{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
|
{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
|
||||||
{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
|
{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
{% set transmit=params.TRANSMIT|default(1) %}
|
||||||
|
|
||||||
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
|
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
|
||||||
|
|
||||||
[gcode_macro _set_nozzle_leds]
|
[gcode_macro _set_nozzle_leds]
|
||||||
gcode:
|
gcode:
|
||||||
{% set red = params.RED|default(0)|float %}
|
{% set red = params.RED|default(0)|float %}
|
||||||
{% set green = params.GREEN|default(0)|float %}
|
{% set green = params.GREEN|default(0)|float %}
|
||||||
{% set blue = params.BLUE|default(0)|float %}
|
{% set blue = params.BLUE|default(0)|float %}
|
||||||
{% set white = params.WHITE|default(0)|float %}
|
{% set white = params.WHITE|default(0)|float %}
|
||||||
{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
|
{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
|
||||||
{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
|
{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
{% set transmit=params.TRANSMIT|default(1) %}
|
||||||
|
|
||||||
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
|
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
|
||||||
|
|
||||||
[gcode_macro set_logo_leds_off]
|
[gcode_macro set_logo_leds_off]
|
||||||
gcode:
|
gcode:
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
{% set transmit=params.TRANSMIT|default(1) %}
|
||||||
_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}
|
_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}
|
||||||
|
|
||||||
[gcode_macro set_nozzle_leds_on]
|
[gcode_macro set_nozzle_leds_on]
|
||||||
gcode:
|
gcode:
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
{% set transmit=params.TRANSMIT|default(1) %}
|
||||||
_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}
|
_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}
|
||||||
|
|
||||||
[gcode_macro set_nozzle_leds_off]
|
[gcode_macro set_nozzle_leds_off]
|
||||||
gcode:
|
gcode:
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
{% set transmit=params.TRANSMIT|default(1) %}
|
||||||
_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}
|
_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}
|
||||||
|
|
||||||
[gcode_macro status_off]
|
[gcode_macro status_off]
|
||||||
gcode:
|
gcode:
|
||||||
set_logo_leds_off transmit=0
|
set_logo_leds_off transmit=0
|
||||||
set_nozzle_leds_off
|
set_nozzle_leds_off
|
||||||
|
|
||||||
[gcode_macro status_ready]
|
[gcode_macro status_ready]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="standby" transmit=0
|
_set_sb_leds_by_name leds="logo" color="standby" transmit=0
|
||||||
_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1
|
_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1
|
||||||
|
|
||||||
[gcode_macro status_busy]
|
[gcode_macro status_busy]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="busy" transmit=0
|
_set_sb_leds_by_name leds="logo" color="busy" transmit=0
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_heating]
|
[gcode_macro status_heating]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="heating" transmit=0
|
_set_sb_leds_by_name leds="logo" color="heating" transmit=0
|
||||||
_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1
|
_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1
|
||||||
|
|
||||||
[gcode_macro status_leveling]
|
[gcode_macro status_leveling]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
|
_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_homing]
|
[gcode_macro status_homing]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="homing" transmit=0
|
_set_sb_leds_by_name leds="logo" color="homing" transmit=0
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_cleaning]
|
[gcode_macro status_cleaning]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
|
_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_meshing]
|
[gcode_macro status_meshing]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
|
_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_calibrating_z]
|
[gcode_macro status_calibrating_z]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
|
_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_printing]
|
[gcode_macro status_printing]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="printing" transmit=0
|
_set_sb_leds_by_name leds="logo" color="printing" transmit=0
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
Reference in new issue
Block a user