diff --git a/printer_data/config/CUSTOM/set_material.cfg b/printer_data/config/CUSTOM/set_material.cfg
index 8e25c0c..1e11df1 100644
--- a/printer_data/config/CUSTOM/set_material.cfg
+++ b/printer_data/config/CUSTOM/set_material.cfg
@@ -492,80 +492,6 @@ variable_pa: 0.04
 #   MAX_FLOW  : Max hotend flow in mm³/s (default: 15)
 #   SMOOTH    : Optional smoothing (default: 0.045)
 
-[gcode_macro SET_PA]
-description: Set Pressure Advance with fully dynamic scaling based on nozzle and flow
-variable_pa: 0.04
-
-# === OVERVIEW ===
-# Fully dynamic Pressure Advance tuning:
-# - Uses nozzle diameter from printer.cfg
-# - Scales PA by nozzle and flow ratio
-# - Automatically sets EXP (flow exponent) as 2x nozzle
-# - Dynamically sets SMOOTH_TIME unless overridden
-#
-# === HOW TO USE ===
-# SET_PA PA=<base_value> [FLOW=<actual_mm3/s>] [MAX_FLOW=<max_mm3/s>] [SMOOTH=<value>] [EXP=<value>]
-#
-# Example:
-#   SET_PA PA=0.05 FLOW=30 MAX_FLOW=70
-#   SET_PA PA=0.05     ; uses defaults (FLOW=10, MAX_FLOW=15)
-
-gcode:
-    {% set base_pa   = params.PA|float %}
-    {% set flow      = params.FLOW|default(10.0)|float %}
-    {% set max_flow  = params.MAX_FLOW|default(15.0)|float %}
-    {% set nozzle    = printer.extruder.nozzle_diameter|float %}
-
-    # === Scale PA based on nozzle diameter ===
-    {% if nozzle <= 0.2 %}
-        {% set nozzle_scale = 1.8 %}
-    {% elif nozzle <= 0.3 %}
-        {% set nozzle_scale = 1.4 %}
-    {% elif nozzle <= 0.4 %}
-        {% set nozzle_scale = 1.0 %}
-    {% elif nozzle <= 0.6 %}
-        {% set nozzle_scale = 0.75 %}
-    {% elif nozzle <= 0.8 %}
-        {% set nozzle_scale = 0.5 %}
-    {% else %}
-        {% set nozzle_scale = 0.4 %}
-    {% endif %}
-    {% set scaled_pa = base_pa * nozzle_scale %}
-
-    # === Calculate exponent from nozzle size unless overridden ===
-    {% set exp = params.EXP|default(2.0 * nozzle)|float %}
-
-    # === Flow ratio and flow scale ===
-    {% set flow_ratio = flow / max_flow %}
-    {% set flow_scale = flow_ratio ** exp %}
-    {% set adjusted_pa = scaled_pa * flow_scale %}
-
-    # === Dynamic smoothing time unless overridden ===
-    {% if 'SMOOTH' in params %}
-        {% set smooth = params.SMOOTH|float %}
-        {% set smooth_source = "manual" %}
-    {% else %}
-        {% if nozzle <= 0.3 %}
-            {% set smooth = 0.03 %}
-        {% elif nozzle <= 0.4 %}
-            {% set smooth = 0.04 %}
-        {% elif nozzle <= 0.6 %}
-            {% set smooth = 0.045 %}
-        {% elif nozzle <= 0.8 %}
-            {% set smooth = 0.055 %}
-        {% else %}
-            {% set smooth = 0.065 %}
-        {% endif %}
-        {% set smooth_source = "dynamic" %}
-    {% endif %}
-
-    # === Set and store final values ===
-    SET_PRESSURE_ADVANCE ADVANCE={adjusted_pa} SMOOTH_TIME={smooth}
-    SET_GCODE_VARIABLE MACRO=SET_PA VARIABLE=pa VALUE={adjusted_pa}
-
-    # === Logging ===
-    {% set msg = "📐 PA scaled | Nozzle: " ~ nozzle|string ~ "mm | Base: " ~ base_pa|string ~ " ➜ x" ~ nozzle_scale|string ~ " ➜ x" ~ flow_scale|string ~ " (flow^" ~ exp|string ~ ") = " ~ adjusted_pa|string ~ " | Smooth: " ~ smooth|string ~ " (" ~ smooth_source ~ ")" %}
-    RESPOND MSG="{msg}"
 
 
 
diff --git a/printer_data/config/CUSTOM/set_pa.cfg b/printer_data/config/CUSTOM/set_pa.cfg
index e69de29..9b7e4d3 100644
--- a/printer_data/config/CUSTOM/set_pa.cfg
+++ b/printer_data/config/CUSTOM/set_pa.cfg
@@ -0,0 +1,74 @@
+[gcode_macro SET_PA]
+description: Set Pressure Advance with fully dynamic scaling based on nozzle and flow
+variable_pa: 0.04
+
+# === OVERVIEW ===
+# Fully dynamic Pressure Advance tuning:
+# - Uses nozzle diameter from printer.cfg
+# - Scales PA by nozzle and flow ratio
+# - Automatically sets EXP (flow exponent) as 2x nozzle
+# - Dynamically sets SMOOTH_TIME unless overridden
+#
+# === HOW TO USE ===
+# SET_PA PA=<base_value> [FLOW=<actual_mm3/s>] [MAX_FLOW=<max_mm3/s>] [SMOOTH=<value>] [EXP=<value>]
+#
+# Example:
+#   SET_PA PA=0.05 FLOW=30 MAX_FLOW=70
+#   SET_PA PA=0.05     ; uses defaults (FLOW=10, MAX_FLOW=15)
+
+gcode:
+    {% set base_pa   = params.PA|float %}
+    {% set flow      = params.FLOW|default(10.0)|float %}
+    {% set max_flow  = params.MAX_FLOW|default(15.0)|float %}
+    {% set nozzle    = printer.extruder.nozzle_diameter|float %}
+
+    # === Scale PA based on nozzle diameter ===
+    {% if nozzle <= 0.2 %}
+        {% set nozzle_scale = 1.8 %}
+    {% elif nozzle <= 0.3 %}
+        {% set nozzle_scale = 1.4 %}
+    {% elif nozzle <= 0.4 %}
+        {% set nozzle_scale = 1.0 %}
+    {% elif nozzle <= 0.6 %}
+        {% set nozzle_scale = 0.75 %}
+    {% elif nozzle <= 0.8 %}
+        {% set nozzle_scale = 0.5 %}
+    {% else %}
+        {% set nozzle_scale = 0.4 %}
+    {% endif %}
+    {% set scaled_pa = base_pa * nozzle_scale %}
+
+    # === Calculate exponent from nozzle size unless overridden ===
+    {% set exp = params.EXP|default(2.0 * nozzle)|float %}
+
+    # === Flow ratio and flow scale ===
+    {% set flow_ratio = flow / max_flow %}
+    {% set flow_scale = flow_ratio ** exp %}
+    {% set adjusted_pa = scaled_pa * flow_scale %}
+
+    # === Dynamic smoothing time unless overridden ===
+    {% if 'SMOOTH' in params %}
+        {% set smooth = params.SMOOTH|float %}
+        {% set smooth_source = "manual" %}
+    {% else %}
+        {% if nozzle <= 0.3 %}
+            {% set smooth = 0.03 %}
+        {% elif nozzle <= 0.4 %}
+            {% set smooth = 0.04 %}
+        {% elif nozzle <= 0.6 %}
+            {% set smooth = 0.045 %}
+        {% elif nozzle <= 0.8 %}
+            {% set smooth = 0.055 %}
+        {% else %}
+            {% set smooth = 0.065 %}
+        {% endif %}
+        {% set smooth_source = "dynamic" %}
+    {% endif %}
+
+    # === Set and store final values ===
+    SET_PRESSURE_ADVANCE ADVANCE={adjusted_pa} SMOOTH_TIME={smooth}
+    SET_GCODE_VARIABLE MACRO=SET_PA VARIABLE=pa VALUE={adjusted_pa}
+
+    # === Logging ===
+    {% set msg = "📐 PA scaled | Nozzle: " ~ nozzle|string ~ "mm | Base: " ~ base_pa|string ~ " ➜ x" ~ nozzle_scale|string ~ " ➜ x" ~ flow_scale|string ~ " (flow^" ~ exp|string ~ ") = " ~ adjusted_pa|string ~ " | Smooth: " ~ smooth|string ~ " (" ~ smooth_source ~ ")" %}
+    RESPOND MSG="{msg}"