c_evening_daylight.cfg modified - 19/04/25 - 10:13:53

printer_data/config/CUSTOM/c_evening_daylight.cfg

@@ -6,11 +6,11 @@ timeout: 0.3
 initial_duration: 0.25
 gcode:
     {% set output = printer["gcode_shell_command GET_TIME"].output %}
-    {% set debug_msg = "⏱ shell output: " ~ output %}
-    RESPOND MSG="{debug_msg}"
     {% set parts = output.split(" ") %}
     SET_GCODE_VARIABLE MACRO=EVENING_DAYLIGHT VARIABLE=hour VALUE={parts[0]|int}
     SET_GCODE_VARIABLE MACRO=EVENING_DAYLIGHT VARIABLE=minute VALUE={parts[1]|int}
+    {% set debug_msg = "⏱ Stored hour=" ~ parts[0]|int|string ~ " min=" ~ parts[1]|int|string %}
+    RESPOND MSG="{debug_msg}"
 
 [gcode_macro SHOW_LIGHT_TIME]
 gcode: