[gcode_macro FAST_CALIBRATE]
description: >
  Quickly home axis and mesh the print area.
  • Caps nozzle temp at 150 °C (warns if over‑requested)  
  • Heats bed & nozzle, non‑blocking wait (via WAIT_HEAT_ALL)  
  • Clears old mesh, homes, then runs adaptive mesh  
  • Moves to center & probes, with step‑by‑step logs
gcode:
    # ─── STEP 1: Read & Cap Requested Temps ─────────────────────────── #
    {% set extruder_req = params.EXTRUDER|default(0)|int %}
    {% set bed_req      = params.BED     |default(0)|int %}
    {% if extruder_req > 150 %}
        {% set capped_extruder = 150 %}
        {% set warn_msg = "⚠️ Nozzle temp request " ~ extruder_req|string ~ "°C capped to " ~ capped_extruder|string ~ "°C" %}
        RESPOND MSG="{warn_msg}"
    {% else %}
        {% set capped_extruder = extruder_req %}
    {% endif %}

    # ─── STEP 2: Status Overview ──────────────────────────────────────── #
    {% set status_msg = 
        "⚙️ Fast Calibrate Starting | Bed → " ~ bed_req|string ~ "°C" ~ " | Nozzle → " ~ capped_extruder|string ~ "°C" %}
    RESPOND MSG="{status_msg}"

    # ─── STEP 3: Begin Heating Heaters ───────────────────────────────── #
    {% if capped_extruder > 0 %}
        {% set heat_nozzle_msg = "🔥 Heating nozzle to " ~ capped_extruder|string ~ "°C" %}
        RESPOND MSG="{heat_nozzle_msg}"
        M104 S{capped_extruder}
    {% else %}
        RESPOND MSG="ℹ️ Nozzle heating skipped (0°C requested)"
    {% endif %}

    {% if bed_req > 0 %}
        {% set heat_bed_msg = "🔥 Heating bed to " ~ bed_req|string ~ "°C" %}
        RESPOND MSG="{heat_bed_msg}"
        M140 S{bed_req}
    {% else %}
        RESPOND MSG="ℹ️ Bed heating skipped (0°C requested)"
    {% endif %}

    # ─── STEP 4: Non‑blocking Wait for Both Temps ─────────────────────── #
    WAIT_HEAT_ALL

    # ─── STEP 5: Clear Mesh & Home Axes ───────────────────────────────── #
    RESPOND MSG="🧹 Clearing old mesh"
    BED_MESH_CLEAR

    RESPOND MSG="🏠 Homing all axes"
    _CG28

    {% if printer.quad_gantry_level.applied|lower == 'false' %}
        RESPOND MSG="📏 Running quad gantry level"
        STATUS_LEVELING
        QUAD_GANTRY_LEVEL
    {% else %}
        RESPOND MSG="✔️ Gantry already leveled"
    {% endif %}

    # ─── STEP 6: Adaptive Mesh Scan ──────────────────────────────────── #
    RESPOND MSG="🔍 Starting adaptive mesh scan"
    STATUS_MESHING
    BED_MESH_CALIBRATE ADAPTIVE=1

    # ─── STEP 7: Final Probe Touch ───────────────────────────────────── #
    RESPOND MSG="📍 Moving to center for probe touch"
    G1 X{ printer.toolhead.axis_maximum.x/2 } Y{ printer.toolhead.axis_maximum.y/2 } F4500
    CARTOGRAPHER_TOUCH

    # ─── STEP 8: Restore original nozzle temp & wait ────────────────── #
    {% if extruder_req > 0 %}
        {% set restore_msg = "🔁 Restoring nozzle temp to " ~ extruder_req|string ~ "°C" %}
        RESPOND MSG="{restore_msg}"
        M104 S{extruder_req}
        WAIT_HEAT_EXTRUDER
    {% endif %}

    RESPOND MSG="✅ Fast calibration complete"


[gcode_macro WAIT_HEAT_ALL]
description: Wait for bed and nozzle to reach target temps
gcode:
    RESPOND MSG="⏳ Waiting for bed and nozzle to heat..."
    M190 S{printer.heater_bed.target}
    M109 S{printer.extruder.target}
    RESPOND MSG="🔥 Bed and nozzle ready."

[gcode_macro WAIT_HEAT_EXTRUDER]
description: Wait for nozzle to reach target temps
gcode:
    RESPOND MSG="⏳ Waiting for nozzle to heat..."
    M109 S{printer.extruder.target}
    RESPOND MSG="🔥 Nozzle ready."