Quintine
f7c2ac18fe
The RX table filters panda's own transmissions (bus+128), so the 508 camera-feedback spoof was invisible. Now the dump also prints the sendcan table (proves the spoof is being sent and on which bus), a CRUISE_STATE histogram from 813 (tells instantly if the ADAS ECU is in failure states 8/9 or healthy), and the camera's 790 LKAS_ACTIVE ratio.
openpilot tools
System Requirements
openpilot is developed and tested on Ubuntu 24.04, which is the primary development target aside from the supported embedded hardware.
Most of openpilot should work natively on macOS. On Windows you can use WSL for a nearly native Ubuntu experience. Running natively on any other system is not currently recommended and will likely require modifications.
Native setup on Ubuntu 24.04 and macOS
Follow these instructions for a fully managed setup experience. If you'd like to manage the dependencies yourself, just read the setup scripts in this directory.
1. Clone openpilot
git clone https://github.com/commaai/openpilot.git
2. Run the setup script
cd openpilot
tools/op.sh setup
3. Activate a Python shell Activate a shell with the Python dependencies installed:
source .venv/bin/activate
4. Build openpilot
scons -u
WSL on Windows
Windows Subsystem for Linux (WSL) should provide a similar experience to native Ubuntu. WSL 2 specifically has been reported by several users to be a seamless experience.
Follow these instructions to setup the WSL and install the Ubuntu-24.04 distribution. Once your Ubuntu WSL environment is setup, follow the Linux setup instructions to finish setting up your environment. See these instructions for running GUI apps.
NOTE: If you are running WSL 2 and experiencing performance issues with the UI or simulator, you may need to explicitly enable hardware acceleration by setting GALLIUM_DRIVER=d3d12 before commands. Add export GALLIUM_DRIVER=d3d12 to your ~/.bashrc file to make it automatic for future sessions.
CTF
Learn about the openpilot ecosystem and tools by playing our CTF.
Directory Structure
├── cabana/ # View and plot CAN messages from drives or in realtime
├── camerastream/ # Cameras stream over the network
├── joystick/ # Control your car with a joystick
├── lib/ # Libraries to support the tools and reading openpilot logs
├── plotjuggler/ # A tool to plot openpilot logs
├── replay/ # Replay drives and mock openpilot services
├── scripts/ # Miscellaneous scripts
├── serial/ # Tools for using the comma serial
├── sim/ # Run openpilot in a simulator
└── webcam/ # Run openpilot on a PC with webcams