c_evening_daylight.cfg modified - 19/04/25 - 23:50:43

printer_data/config/CUSTOM/c_evening_daylight.cfg

@@ -1,6 +1,6 @@
 [real_time]
 
-[gcode_macro EVENING_DAYLIGHT]
+[gcode_macro SMART_DAYLIGHT]
 variable_last_brightness: -1.0
 gcode:
     {% set hour = printer["real_time"].hour %}
@@ -47,11 +47,18 @@ gcode:
         RESPOND MSG="{fade_msg}"
     {% endif %}
 
-[gcode_macro SMART_DAYLIGHT]
-description: Run EVENING_DAYLIGHT only if timelapse or hyperlapse is active
+[gcode_macro START_SMART_DAYLIGHT]
 gcode:
-    {% set timelapse = printer["gcode_macro TIMELAPSE_TAKE_FRAME"].enable|default(false) %}
-    {% set hyperlapse = printer["gcode_macro HYPERLAPSE"].run|default(false) %}
-    {% if timelapse or hyperlapse %}
-        EVENING_DAYLIGHT
-    {% endif %}
+    UPDATE_DELAYED_GCODE ID=SMART_DAYLIGHT_LOOP DURATION=1
+    RESPOND MSG="🌞 SMART_DAYLIGHT started"
+
+[gcode_macro STOP_SMART_DAYLIGHT]
+gcode:
+    UPDATE_DELAYED_GCODE ID=SMART_DAYLIGHT_LOOP DURATION=0
+    RESPOND MSG="🛑 SMART_DAYLIGHT stopped"
+
+[delayed_gcode SMART_DAYLIGHT_LOOP]
+initial_duration: 5
+gcode:
+    SMART_DAYLIGHT
+    UPDATE_DELAYED_GCODE ID=SMART_DAYLIGHT_LOOP DURATION=30