printer.cfg modified - 18/04/25 - 11:14:13
This commit is contained in:
pi committed
1 parent
ebbba334da
commit
5bfe26dacc
1 file changed
+41
-96
@@ -292,27 +292,6 @@ max_speed: 1.0
|
||||
|
||||
gcode_id: C
|
||||
|
||||
#[temperature_fan exhaust_fan]
|
||||
## Exhaust fan - CNC_FAN3
|
||||
#pin: PE5
|
||||
#max_power: 1.0
|
||||
#shutdown_speed: 0.0
|
||||
#kick_start_time: 5.0
|
||||
#cycle_time:0.05
|
||||
#off_below:0.1
|
||||
#sensor_type: temperature_combined
|
||||
#sensor_list: temperature_sensor _chamber_1,temperature_sensor _chamber_2,temperature_sensor _chamber_3,temperature_sensor _chamber_4
|
||||
#combination_method: mean
|
||||
#maximum_deviation: 999
|
||||
#min_temp: 0
|
||||
#max_temp: 80
|
||||
#target_temp: 35.0
|
||||
#max_delta: 0.5
|
||||
#max_speed: 1.0
|
||||
#min_speed: 0.3
|
||||
#control: watermark
|
||||
#gcode_id: C
|
||||
|
||||
[gcode_macro M141]
|
||||
gcode:
|
||||
{% set s = params.S|default(0)|float %}
|
||||
@@ -342,73 +321,6 @@ pin: PB11
|
||||
pwm: True
|
||||
cycle_time: 0.01
|
||||
|
||||
#####################################################################
|
||||
# Homing and Gantry Adjustment Routines
|
||||
#####################################################################
|
||||
|
||||
[idle_timeout]
|
||||
timeout: 1800
|
||||
|
||||
#[safe_z_home]
|
||||
## XY Location of the Z Endstop Switch
|
||||
## Update -10,-10 to the XY coordinates of your endstop pin
|
||||
## (such as 157,305) after going through Z Endstop Pin
|
||||
## Location Definition step.
|
||||
#home_xy_position:175,175
|
||||
#speed:100
|
||||
#z_hop:10
|
||||
|
||||
[quad_gantry_level]
|
||||
## Use QUAD_GANTRY_LEVEL to level a gantry.
|
||||
## Min & Max gantry corners - measure from nozzle at MIN (0,0) and
|
||||
## MAX (250, 250), (300,300), or (350,350) depending on your printer size
|
||||
## to respective belt positions
|
||||
|
||||
#--------------------------------------------------------------------
|
||||
## Gantry Corners for 250mm Build
|
||||
## Uncomment for 250mm build
|
||||
#gantry_corners:
|
||||
# -60,-10
|
||||
# 310, 320
|
||||
## Probe points
|
||||
#points:
|
||||
# 50,25
|
||||
# 50,175
|
||||
# 200,175
|
||||
# 200,25
|
||||
|
||||
## Gantry Corners for 300mm Build
|
||||
## Uncomment for 300mm build
|
||||
#gantry_corners:
|
||||
# -60,-10
|
||||
# 360,370
|
||||
## Probe points
|
||||
#points:
|
||||
# 50,25
|
||||
# 50,225
|
||||
# 250,225
|
||||
# 250,25
|
||||
|
||||
## Gantry Corners for 350mm Build
|
||||
## Uncomment for 350mm build
|
||||
gantry_corners:
|
||||
-60,-10
|
||||
410,420
|
||||
# Probe points
|
||||
points:
|
||||
50,25
|
||||
50,275
|
||||
300,275
|
||||
300,25
|
||||
|
||||
#--------------------------------------------------------------------
|
||||
speed: 200
|
||||
horizontal_move_z: 2
|
||||
retries: 15
|
||||
retry_tolerance: 0.015
|
||||
max_adjust: 5
|
||||
|
||||
|
||||
#--------------------------------------------------------------------
|
||||
|
||||
[neopixel front_logo]
|
||||
@@ -432,6 +344,47 @@ initial_WHITE: 0.0
|
||||
# See the "led" section for information on these parameters.
|
||||
#--------------------------------------------------------------------
|
||||
|
||||
#####################################################################
|
||||
# Homing and Gantry Adjustment Routines
|
||||
#####################################################################
|
||||
|
||||
[idle_timeout]
|
||||
timeout: 1800
|
||||
|
||||
#[safe_z_home]
|
||||
## XY Location of the Z Endstop Switch
|
||||
## Update -10,-10 to the XY coordinates of your endstop pin
|
||||
## (such as 157,305) after going through Z Endstop Pin
|
||||
## Location Definition step.
|
||||
#home_xy_position:175,175
|
||||
#speed:100
|
||||
#z_hop:10
|
||||
|
||||
[quad_gantry_level]
|
||||
## Use QUAD_GANTRY_LEVEL to level a gantry.
|
||||
## Min & Max gantry corners - measure from nozzle at MIN (0,0) and
|
||||
## MAX (250, 250), (300,300), or (350,350) depending on your printer size
|
||||
## to respective belt positions
|
||||
|
||||
## Gantry Corners for 350mm Build
|
||||
## Uncomment for 350mm build
|
||||
gantry_corners:
|
||||
-60,-10
|
||||
410,420
|
||||
# Probe points
|
||||
points:
|
||||
50,25
|
||||
50,275
|
||||
300,275
|
||||
300,25
|
||||
|
||||
#--------------------------------------------------------------------
|
||||
speed: 300
|
||||
horizontal_move_z: 2
|
||||
retries: 15
|
||||
retry_tolerance: 0.015
|
||||
max_adjust: 5
|
||||
|
||||
|
||||
#####################################################################
|
||||
# Macros
|
||||
@@ -478,14 +431,6 @@ gcode:
|
||||
BED_MESH_CLEAR
|
||||
SET_PIN PIN=daylight VALUE=0.0
|
||||
|
||||
## Thermistor Types
|
||||
## "EPCOS 100K B57560G104F"
|
||||
## "ATC Semitec 104GT-2"
|
||||
## "NTC 100K beta 3950"
|
||||
## "Honeywell 100K 135-104LAG-J01"
|
||||
## "NTC 100K MGB18-104F39050L32" (Keenovo Heater Pad)
|
||||
## "AD595"
|
||||
## "PT100 INA826"
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
|
||||
Reference in new issue
Block a user