s_fast_calibrate.cfg modified - 18/04/25 - 10:08:20

2025-04-18 10:08:23 +01:00
1 parent ee2e8eb174
commit ebbba334da
@@ -0,0 +1,94 @@
+[gcode_macro FAST_CALIBRATE]
+description: >
+  Quickly home axis and mesh the print area.
+  • Caps nozzle temp at 150 °C (warns if over‑requested)  
+  • Heats bed & nozzle, non‑blocking wait (via WAIT_HEAT_ALL)  
+  • Clears old mesh, homes, then runs adaptive mesh  
+  • Moves to center & probes, with step‑by‑step logs
+gcode:
+    # ─── STEP 1: Read & Cap Requested Temps ─────────────────────────── #
+    {% set extruder_req = params.EXTRUDER|default(0)|int %}
+    {% set bed_req      = params.BED     |default(0)|int %}
+    {% if extruder_req > 150 %}
+        {% set capped_extruder = 150 %}
+        {% set warn_msg = "⚠️ Nozzle temp request " ~ extruder_req|string ~ "°C capped to " ~ capped_extruder|string ~ "°C" %}
+        RESPOND MSG="{warn_msg}"
+    {% else %}
+        {% set capped_extruder = extruder_req %}
+    {% endif %}
+
+    # ─── STEP 2: Status Overview ──────────────────────────────────────── #
+    {% set status_msg = 
+        "⚙️ Fast Calibrate Starting | Bed → " ~ bed_req|string ~ "°C" ~ " | Nozzle → " ~ capped_extruder|string ~ "°C" %}
+    RESPOND MSG="{status_msg}"
+
+    # ─── STEP 3: Begin Heating Heaters ───────────────────────────────── #
+    {% if capped_extruder > 0 %}
+        {% set heat_nozzle_msg = "🔥 Heating nozzle to " ~ capped_extruder|string ~ "°C" %}
+        RESPOND MSG="{heat_nozzle_msg}"
+        M104 S{capped_extruder}
+    {% else %}
+        RESPOND MSG="ℹ️ Nozzle heating skipped (0°C requested)"
+    {% endif %}
+
+    {% if bed_req > 0 %}
+        {% set heat_bed_msg = "🔥 Heating bed to " ~ bed_req|string ~ "°C" %}
+        RESPOND MSG="{heat_bed_msg}"
+        M140 S{bed_req}
+    {% else %}
+        RESPOND MSG="ℹ️ Bed heating skipped (0°C requested)"
+    {% endif %}
+
+    # ─── STEP 4: Non‑blocking Wait for Both Temps ─────────────────────── #
+    WAIT_HEAT_ALL
+
+    # ─── STEP 5: Clear Mesh & Home Axes ───────────────────────────────── #
+    RESPOND MSG="🧹 Clearing old mesh"
+    BED_MESH_CLEAR
+
+    RESPOND MSG="🏠 Homing all axes"
+    _CG28
+
+    {% if printer.quad_gantry_level.applied|lower == 'false' %}
+        RESPOND MSG="📏 Running quad gantry level"
+        STATUS_LEVELING
+        QUAD_GANTRY_LEVEL
+    {% else %}
+        RESPOND MSG="✔️ Gantry already leveled"
+    {% endif %}
+
+    # ─── STEP 6: Adaptive Mesh Scan ──────────────────────────────────── #
+    RESPOND MSG="🔍 Starting adaptive mesh scan"
+    STATUS_MESHING
+    BED_MESH_CALIBRATE ADAPTIVE=1
+
+    # ─── STEP 7: Final Probe Touch ───────────────────────────────────── #
+    RESPOND MSG="📍 Moving to center for probe touch"
+    G1 X{ printer.toolhead.axis_maximum.x/2 } Y{ printer.toolhead.axis_maximum.y/2 } F4500
+    CARTOGRAPHER_TOUCH
+
+    # ─── STEP 8: Restore original nozzle temp & wait ────────────────── #
+    {% if extruder_req > 0 %}
+        {% set restore_msg = "🔁 Restoring nozzle temp to " ~ extruder_req|string ~ "°C" %}
+        RESPOND MSG="{restore_msg}"
+        M104 S{extruder_req}
+        WAIT_HEAT_EXTRUDER
+    {% endif %}
+
+    RESPOND MSG="✅ Fast calibration complete"
+
+
+[gcode_macro WAIT_HEAT_ALL]
+description: Wait for bed and nozzle to reach target temps
+gcode:
+    RESPOND MSG="⏳ Waiting for bed and nozzle to heat..."
+    M190 S{printer.heater_bed.target}
+    M109 S{printer.extruder.target}
+    RESPOND MSG="🔥 Bed and nozzle ready."
+
+[gcode_macro WAIT_HEAT_EXTRUDER]
+description: Wait for nozzle to reach target temps
+gcode:
+    RESPOND MSG="⏳ Waiting for nozzle to heat..."
+    M109 S{printer.extruder.target}
+    RESPOND MSG="🔥 Nozzle ready."