printer.cfg modified - 18/04/25 - 11:14:13

printer_data/config/printer.cfg

@@ -292,27 +292,6 @@ max_speed: 1.0
 
 gcode_id: C
 
-#[temperature_fan exhaust_fan]
-##	Exhaust fan - CNC_FAN3
-#pin: PE5
-#max_power: 1.0
-#shutdown_speed: 0.0
-#kick_start_time: 5.0
-#cycle_time:0.05
-#off_below:0.1
-#sensor_type: temperature_combined
-#sensor_list: temperature_sensor _chamber_1,temperature_sensor _chamber_2,temperature_sensor _chamber_3,temperature_sensor _chamber_4
-#combination_method: mean
-#maximum_deviation: 999
-#min_temp: 0
-#max_temp: 80
-#target_temp: 35.0
-#max_delta: 0.5
-#max_speed: 1.0
-#min_speed: 0.3
-#control: watermark
-#gcode_id: C
-
 [gcode_macro M141]
 gcode:
     {% set s = params.S|default(0)|float %}
@@ -342,73 +321,6 @@ pin: PB11
 pwm: True
 cycle_time: 0.01
 
-#####################################################################
-# 	Homing and Gantry Adjustment Routines
-#####################################################################
-
-[idle_timeout]
-timeout: 1800
-
-#[safe_z_home]
-##	XY Location of the Z Endstop Switch
-##	Update -10,-10 to the XY coordinates of your endstop pin 
-##	(such as 157,305) after going through Z Endstop Pin
-##	Location Definition step.
-#home_xy_position:175,175
-#speed:100
-#z_hop:10
-
-[quad_gantry_level]
-##	Use QUAD_GANTRY_LEVEL to level a gantry.
-##	Min & Max gantry corners - measure from nozzle at MIN (0,0) and 
-##	MAX (250, 250), (300,300), or (350,350) depending on your printer size
-##	to respective belt positions
-
-#--------------------------------------------------------------------
-##	Gantry Corners for 250mm Build
-##	Uncomment for 250mm build
-#gantry_corners:
-#	-60,-10
-#	310, 320
-##	Probe points
-#points:
-#	50,25
-#	50,175
-#	200,175
-#	200,25
-	
-##	Gantry Corners for 300mm Build
-##	Uncomment for 300mm build
-#gantry_corners:
-#	-60,-10
-#	360,370
-##	Probe points
-#points:
-#	50,25
-#	50,225
-#	250,225
-#	250,25
-
-##	Gantry Corners for 350mm Build
-##	Uncomment for 350mm build
-gantry_corners:
-	-60,-10
-	410,420
-#	Probe points
-points:
-	50,25
-	50,275
-	300,275
-	300,25
-
-#--------------------------------------------------------------------
-speed: 200
-horizontal_move_z: 2
-retries: 15
-retry_tolerance: 0.015
-max_adjust: 5
-
-
 #--------------------------------------------------------------------
 
 [neopixel front_logo]
@@ -432,6 +344,47 @@ initial_WHITE: 0.0
 #   See the "led" section for information on these parameters.
 #--------------------------------------------------------------------
 
+#####################################################################
+# 	Homing and Gantry Adjustment Routines
+#####################################################################
+
+[idle_timeout]
+timeout: 1800
+
+#[safe_z_home]
+##	XY Location of the Z Endstop Switch
+##	Update -10,-10 to the XY coordinates of your endstop pin 
+##	(such as 157,305) after going through Z Endstop Pin
+##	Location Definition step.
+#home_xy_position:175,175
+#speed:100
+#z_hop:10
+
+[quad_gantry_level]
+##	Use QUAD_GANTRY_LEVEL to level a gantry.
+##	Min & Max gantry corners - measure from nozzle at MIN (0,0) and 
+##	MAX (250, 250), (300,300), or (350,350) depending on your printer size
+##	to respective belt positions
+
+##	Gantry Corners for 350mm Build
+##	Uncomment for 350mm build
+gantry_corners:
+	-60,-10
+	410,420
+#	Probe points
+points:
+	50,25
+	50,275
+	300,275
+	300,25
+
+#--------------------------------------------------------------------
+speed: 300
+horizontal_move_z: 2
+retries: 15
+retry_tolerance: 0.015
+max_adjust: 5
+
 
 #####################################################################
 # 	Macros
@@ -478,14 +431,6 @@ gcode:
     BED_MESH_CLEAR
     SET_PIN PIN=daylight VALUE=0.0
     
-## 	Thermistor Types
-##   "EPCOS 100K B57560G104F"
-##   "ATC Semitec 104GT-2"
-##   "NTC 100K beta 3950"
-##   "Honeywell 100K 135-104LAG-J01"
-##   "NTC 100K MGB18-104F39050L32" (Keenovo Heater Pad)
-##   "AD595"
-##   "PT100 INA826"
 
 #*# <---------------------- SAVE_CONFIG ---------------------->
 #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.