c_smart_daylight.cfg modified - 19/04/25 - 12:50:55

printer_data/config/CUSTOM/c_smart_daylight.cfg

@@ -1,9 +1,6 @@
 [gcode_macro SMART_DAYLIGHT]
-description: Adjust daylight only if timelapse is enabled
+description: Run EVENING_DAYLIGHT only if timelapse is enabled (no messages)
 gcode:
-    {% if printer["timelapse_status"].enabled %}
-        RESPOND MSG="🎥 Timelapse active — adjusting daylight"
+    {% if printer["gcode_macro TIMELAPSE_TAKE_FRAME"].enable %}
         EVENING_DAYLIGHT
-    {% else %}
-        G4 P0
     {% endif %}