led_control.cfg modified - 19/04/25 - 14:52:48

printer_data/config/SYSTEM/led_control.cfg

@@ -0,0 +1,39 @@
+#####################################################################
+# 	LED Control
+#####################################################################
+
+#[output_pin caselight]
+# Chamber Lighting - HE1 Connector (Optional)
+#pin: PB11
+#pwm:true
+#shutdown_value: 0
+#value:1
+#cycle_time: 0.01
+
+[output_pin daylight]
+pin: PB11
+pwm: True
+cycle_time: 0.01
+
+#--------------------------------------------------------------------
+
+[neopixel front_logo]
+
+pin: PB0
+#   The pin connected to the neopixel. This parameter must be
+#   provided.
+chain_count: 7
+#   The number of Neopixel chips that are "daisy chained" to the
+#   provided pin. The default is 1 (which indicates only a single
+#   Neopixel is connected to the pin).
+color_order: GRB
+#   Set the pixel order required by the LED hardware (using a string
+#   containing the letters R, G, B, W with W optional). Alternatively,
+#   this may be a comma separated list of pixel orders - one for each
+#   LED in the chain. The default is GRB.
+initial_RED: 1.0
+initial_GREEN: 0.0
+initial_BLUE: 0.0
+initial_WHITE: 0.0
+#   See the "led" section for information on these parameters.
+#--------------------------------------------------------------------