printer.cfg modified - 19/04/25 - 14:54:35

printer_data/config/printer.cfg

@@ -56,48 +56,6 @@ enable_force_move: True
 [gcode_arcs]
 resolution: 0.1
 
-#####################################################################
-# 	Homing and Gantry Adjustment Routines
-#####################################################################
-
-[idle_timeout]
-timeout: 1800
-
-#[safe_z_home]
-##	XY Location of the Z Endstop Switch
-##	Update -10,-10 to the XY coordinates of your endstop pin 
-##	(such as 157,305) after going through Z Endstop Pin
-##	Location Definition step.
-#home_xy_position:175,175
-#speed:100
-#z_hop:10
-
-[quad_gantry_level]
-##	Use QUAD_GANTRY_LEVEL to level a gantry.
-##	Min & Max gantry corners - measure from nozzle at MIN (0,0) and 
-##	MAX (250, 250), (300,300), or (350,350) depending on your printer size
-##	to respective belt positions
-
-##	Gantry Corners for 350mm Build
-##	Uncomment for 350mm build
-gantry_corners:
-	-60,-10
-	410,420
-#	Probe points
-points:
-	50,25
-	50,275
-	300,275
-	300,25
-
-#--------------------------------------------------------------------
-speed: 300
-horizontal_move_z: 2
-retries: 15
-retry_tolerance: 0.015
-max_adjust: 5
-
-
 #####################################################################
 # 	Macros
 #####################################################################