c_evening_daylight.cfg modified - 19/04/25 - 10:55:10

printer_data/config/CUSTOM/c_evening_daylight.cfg

@@ -1,39 +1,8 @@
-[gcode_shell_command GET_TIME]
-command: sh /home/pi/printer_data/config/SCRIPTS/get_time.sh
-timeout: 0.05
-verbose: False
-
-[gcode_macro FETCH_TIME]
-gcode:
-    RUN_SHELL_COMMAND CMD=GET_TIME
-
-[delayed_gcode process_time_output]
-initial_duration: 0.25
-gcode:
-    {% set output = printer["shell_command"].output %}
-    {% set parts = output.split(" ") %}
-    SET_GCODE_VARIABLE MACRO=TIME_STATE VARIABLE=hour VALUE={parts[0]|int}
-    SET_GCODE_VARIABLE MACRO=TIME_STATE VARIABLE=minute VALUE={parts[1]|int}
-
-[gcode_macro CHECK_AND_FADE_LIGHT]
-gcode:
-    FETCH_TIME
-    UPDATE_DELAYED_GCODE ID=process_time_output DURATION=0.25
-    G4 P500
-    EVENING_DAYLIGHT
-    
-[gcode_macro SHOW_LIGHT_TIME]
-gcode:
-    {% set hour = printer["gcode_macro EVENING_DAYLIGHT"].hour %}
-    {% set minute = printer["gcode_macro EVENING_DAYLIGHT"].minute %}
-    {% set msg = "🕒 Stored time: " ~ hour|string ~ ":" ~ ("%02d"|format(minute)) %}
-    RESPOND MSG="{msg}"
-
 [gcode_macro EVENING_DAYLIGHT]
-variable_hour: 0
-variable_minute: 0
 variable_last_brightness: -1.0
 gcode:
+    {% set hour = printer["real_time"].hour %}
+    {% set minute = printer["real_time"].minute %}
     {% set total_minutes = hour * 60 + minute %}
     {% set fade_out_start = 7 * 60 %}
     {% set fade_out_end = 8 * 60 %}