evening_daylight.cfg modified - 18/04/25 - 09:35:48

printer_data/config/CUSTOM/evening_daylight.cfg

@@ -0,0 +1,24 @@
+[gcode_macro EVENING_DAYLIGHT]
+description: Fade in daylight between 4:30pm and 6:00pm
+gcode:
+    {% set hour = now().hour %}
+    {% set minute = now().minute %}
+    {% set total_minutes = hour * 60 + minute %}
+    {% set fade_start = 16 * 60 + 30 %}
+    {% set fade_end = 18 * 60 %}
+
+    {% if total_minutes < fade_start %}
+        SET_PIN PIN=daylight VALUE=0
+        RESPOND MSG="🌑 Daylight: OFF (before 4:30pm)"
+    {% elif total_minutes >= fade_end %}
+        SET_PIN PIN=daylight VALUE=1
+        RESPOND MSG="🌕 Daylight: ON 100% (after 6pm)"
+    {% else %}
+        {% set progress = (total_minutes - fade_start) / (fade_end - fade_start) %}
+        {% set brightness = progress %}
+        SET_PIN PIN=daylight VALUE={{ brightness|round(3) }}
+
+        {% set time_display = hour|string ~ ":" ~ ("%02d"|format(minute)) %}
+        {% set fade_msg = "🌗 Daylight: " ~ (brightness * 100)|int|string ~ "% (" ~ time_display ~ ")" %}
+        RESPOND MSG="{fade_msg}"
+    {% endif %}