s_bed_mesh.cfg modified - 21/04/25 - 19:12:21

printer_data/config/CUSTOM/s_bed_mesh.cfg

@@ -27,7 +27,7 @@ gcode:
     # If QGL has not been done yet, correct for any major skew first
     # at 8mm height
     {% if not printer.quad_gantry_level.applied %}
-    _QUAD_GANTRY_LEVEL horizontal_move_z=8 retry_tolerance=1      
+    _QUAD_GANTRY_LEVEL horizontal_move_z=10 retry_tolerance=1 max_adjust=8      
     {% endif %}
     # Compelte with a full QGL at the configured height
     _QUAD_GANTRY_LEVEL