45 lines
1.7 KiB
INI
45 lines
1.7 KiB
INI
#####################################################################
|
|
# Macros
|
|
#####################################################################
|
|
|
|
|
|
[gcode_macro G32]
|
|
description: Home XYZ mesh calibrate
|
|
gcode:
|
|
G28
|
|
QUAD_GANTRY_LEVEL
|
|
BED_MESH_CALIBRATE
|
|
G1 X{ printer.toolhead.axis_maximum.x/2 } Y{ printer.toolhead.axis_maximum.y/2 } Z30 F4500
|
|
CARTOGRAPHER_TOUCH
|
|
STATUS_READY
|
|
#--------------------------------------------------------------------
|
|
|
|
[gcode_macro PRINT_START]
|
|
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
|
gcode:
|
|
RESPOND MSG="🚦 Waiting for bed/chamber readiness..."
|
|
SET_MATERIAL {rawparams}
|
|
FAST_CALIBRATE {rawparams}
|
|
CLEAN_NOZZLE
|
|
STATUS_PRINTING
|
|
LINE_PURGE
|
|
|
|
[gcode_macro PRINT_END]
|
|
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
|
|
gcode:
|
|
M400 ; wait for buffer to clear
|
|
G92 E0 ; zero the extruder
|
|
G1 E-10.0 F3600 ; retract filament
|
|
G91 ; relative positioning
|
|
G0 Z1.00 X20.0 Y20.0 F20000 ; move nozzle to remove stringing
|
|
TURN_OFF_HEATERS
|
|
M107 ; turn off fan
|
|
M106 S0
|
|
G1 Z5 F3000 ; move nozzle up 5mm
|
|
G90 ; absolute positioning
|
|
|
|
{% if not printer["gcode_macro SMART_DAYLIGHT"].smart_daylight_enabled %}
|
|
SET_PIN PIN=daylight VALUE=0
|
|
SET_GCODE_VARIABLE MACRO=SMART_DAYLIGHT VARIABLE=last_brightness VALUE=0.0
|
|
RESPOND MSG="🌙 SMART_DAYLIGHT not active — lights turned off and state reset"
|
|
{% endif %} |