32 lines
1.1 KiB
INI
32 lines
1.1 KiB
INI
[mcu scanner]
|
|
#canbus_uuid: 0ca8d67388c2
|
|
serial: /dev/serial/by-id/usb-Cartographer_614e_2B0021000F43304146393320-if00
|
|
# adjust to suit your scanner, if using usb change to serial
|
|
|
|
[scanner]
|
|
mcu: scanner
|
|
# Offsets are measured from the centre of your coil, to the tip of your nozzle
|
|
# on a level axis. It is vital that this is accurate.
|
|
x_offset: 0
|
|
# adjust for your cartographers offset from nozzle to middle of coil
|
|
y_offset: 23
|
|
# adjust for your cartographers offset from nozzle to middle of coil
|
|
backlash_comp: 0.5
|
|
# Backlash compensation distance for removing Z backlash before measuring
|
|
# the sensor response.
|
|
sensor: cartographer
|
|
# this must be set as cartographer unless using IDM etc.
|
|
sensor_alt: carto
|
|
# alternate name to call commands. CARTO_TOUCH etc
|
|
mesh_runs: 2
|
|
# Number of passes to make during mesh scan.
|
|
|
|
[temperature_sensor Cartographer_MCU]
|
|
sensor_type: temperature_mcu
|
|
sensor_mcu: scanner
|
|
min_temp: 0
|
|
max_temp: 105
|
|
|
|
[gcode_macro PROBE_CALIBRATE]
|
|
gcode:
|
|
CARTOGRAPHER_CALIBRATE |