byd: support SEAL steering feedback on 508 STEERING_TORQUE_ANGLE

The Seal EPS reports steering torque/prepare/activated state on
508 STEERING_TORQUE_ANGLE (different bit layout; driver torque factor
0.1), unlike the Han which uses 792 STEERING_TORQUE. The Seal's
fingerprint contains 508 but not 792, so alive-checking 792 tripped
canError ("Unknown Vehicle Variant") the moment the interface started.

- carstate: per-platform steering message selection (508 strict-checked
  on Seal, 792 on Han; the other parsed opportunistically)
- carcontroller: don't send 792-layout camera feedback on the Seal;
  stock 508 forwards unmodified for now (camera-feedback spoofing for
  the Seal's 508 to be evaluated after a bus dump + road test)
- panda byd.h: rx check accepts 792 or 508 (first-seen-wins), torque
  sampling handles both layouts, driver torque rescaled for 508's 0.1x
  factor
- panda firmware rebuilt (panda_h7.bin.signed)
- tests: Seal(508) + Han(792) both verified canValid with correct
  torque values; 120 safety tests + MISRA clean
This commit is contained in:
Quintine committed 2026-07-25 18:32:42 +10:00
1 parent 264ebf956e
commit b598ba5dcb
21 files changed
+57 -21

No files matched your search

+12 -6
View File
@@ -4,7 +4,7 @@ from opendbc.car import Bus, structs
from opendbc.car.lateral import apply_meas_steer_torque_limits
from opendbc.car.interfaces import CarControllerBase
from opendbc.car.byd.bydcan import BydCAN
from opendbc.car.byd.values import CarControllerParams
from opendbc.car.byd.values import CAR, CarControllerParams
VisualAlert = structs.CarControl.HUDControl.VisualAlert
ButtonType = structs.CarState.ButtonEvent.Type
@@ -30,6 +30,11 @@ class CarController(CarControllerBase):
self.apply_accel_last = 0
# EPS steering feedback forwarding (792 STEERING_TORQUE) only applies to
# platforms whose EPS reports on 792 (HAN). The SEAL EPS reports on
# 508 STEERING_TORQUE_ANGLE which is forwarded stock for now.
self.send_steering_feedback = CP.carFingerprint != CAR.BYD_SEAL_PERFORMANCE_25
def update(self, CC, CC_SP, CS, now_nanos):
# car control running in 100Hz
actuators = CC.actuators
@@ -75,11 +80,12 @@ class CarController(CarControllerBase):
lkas_request_prepare, lkas_active,
lkas_mode, CS.eps_activated)
can_sends.append(pack)
pack = self.can.create_steering_torque(CS.eps_steering_torque_msg,
CS.mpc_lkas_output,
CS.mpc_lkas_request_prepare,
CS.mpc_lkas_active)
can_sends.append(pack)
if self.send_steering_feedback:
pack = self.can.create_steering_torque(CS.eps_steering_torque_msg,
CS.mpc_lkas_output,
CS.mpc_lkas_request_prepare,
CS.mpc_lkas_active)
can_sends.append(pack)
self.apply_torque_last = apply_torque