byd: support SEAL steering feedback on 508 STEERING_TORQUE_ANGLE

The Seal EPS reports steering torque/prepare/activated state on
508 STEERING_TORQUE_ANGLE (different bit layout; driver torque factor
0.1), unlike the Han which uses 792 STEERING_TORQUE. The Seal's
fingerprint contains 508 but not 792, so alive-checking 792 tripped
canError ("Unknown Vehicle Variant") the moment the interface started.

- carstate: per-platform steering message selection (508 strict-checked
  on Seal, 792 on Han; the other parsed opportunistically)
- carcontroller: don't send 792-layout camera feedback on the Seal;
  stock 508 forwards unmodified for now (camera-feedback spoofing for
  the Seal's 508 to be evaluated after a bus dump + road test)
- panda byd.h: rx check accepts 792 or 508 (first-seen-wins), torque
  sampling handles both layouts, driver torque rescaled for 508's 0.1x
  factor
- panda firmware rebuilt (panda_h7.bin.signed)
- tests: Seal(508) + Han(792) both verified canValid with correct
  torque values; 120 safety tests + MISRA clean
This commit is contained in:
Quintine committed 2026-07-25 18:32:42 +10:00
1 parent 264ebf956e
commit b598ba5dcb
21 files changed
+57 -21

No files matched your search

+18 -3
View File
@@ -3,9 +3,12 @@
// MPC_LKAS_CMD (790), little endian
#define BYD_GET_LKAS_OUTPUT(msg) (to_signed((((msg)->data[3] & 0x7U) << 8U) | (msg)->data[2], 11))
#define BYD_LKAS_ACTIVE_BIT 28U
// STEERING_TORQUE (792), little endian
// STEERING_TORQUE (792, HAN), little endian
#define BYD_GET_MAIN_TORQUE(msg) (to_signed((((msg)->data[2] & 0xFU) << 8U) | (msg)->data[1], 12))
#define BYD_GET_DRIVER_TORQUE(msg) (to_signed((((msg)->data[4] & 0xFU) << 8U) | (msg)->data[3], 12))
// STEERING_TORQUE_ANGLE (508, SEAL), little endian
#define BYD_GET_MAIN_TORQUE_ANGLE(msg) (to_signed((((msg)->data[5] & 0xFU) << 8U) | (msg)->data[4], 12))
#define BYD_GET_DRIVER_TORQUE_ANGLE(msg) (to_signed((((msg)->data[1] & 0xFU) << 4U) | ((msg)->data[0] >> 4U), 12))
// PCM_BUTTONS (944)
#define BYD_LKAS_ON_BTN_BIT 14U
@@ -73,7 +76,7 @@ static void byd_rx_hook(const CANPacket_t *msg) {
if (msg->addr == 289U) {
vehicle_moving = (((msg->data[1] & 0x0FU) << 8U) | msg->data[0]) != 0U;
}
// STEERING_TORQUE: sample EPS output torque and driver torque
// STEERING_TORQUE (HAN): sample EPS output torque and driver torque
if (msg->addr == 792U) {
int torque_meas_new = BYD_GET_MAIN_TORQUE(msg);
update_sample(&torque_meas, torque_meas_new);
@@ -83,6 +86,17 @@ static void byd_rx_hook(const CANPacket_t *msg) {
int torque_driver_new = BYD_GET_DRIVER_TORQUE(msg);
update_sample(&torque_driver, torque_driver_new);
}
// STEERING_TORQUE_ANGLE (SEAL): same feedback on a different message/layout
if (msg->addr == 508U) {
int torque_meas_new = BYD_GET_MAIN_TORQUE_ANGLE(msg);
update_sample(&torque_meas, torque_meas_new);
torque_meas.min--;
torque_meas.max++;
// driver torque factor is 0.1 on this message
int torque_driver_new = (BYD_GET_DRIVER_TORQUE_ANGLE(msg) + 5) / 10;
update_sample(&torque_driver, torque_driver_new);
}
// PCM_BUTTONS: dedicated LKAS steering wheel button for MADS
if (msg->addr == 944U) {
mads_button_press = GET_BIT(msg, BYD_LKAS_ON_BTN_BIT) ? MADS_BUTTON_PRESSED : MADS_BUTTON_NOT_PRESSED;
@@ -118,7 +132,8 @@ static safety_config byd_init(uint16_t param) {
{.msg = {{834, 0, 8, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }, { 0 }}}, // PEDAL
{.msg = {{289, 0, 8, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }, { 0 }}}, // ESC
{.msg = {{287, 0, 5, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }, { 0 }}}, // STEER_MODULE
{.msg = {{792, 0, 8, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }, { 0 }}}, // STEERING_TORQUE
{.msg = {{792, 0, 8, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, // STEERING_TORQUE (HAN)
{508, 0, 8, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }}}, // STEERING_TORQUE_ANGLE (SEAL)
{.msg = {{944, 0, 8, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }, { 0 }}}, // PCM_BUTTONS
{.msg = {{813, 2, 8, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }, { 0 }}}, // ACC_HUD_ADAS
{.msg = {{307, 0, 8, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }, { 0 }}}, // STALKS