Files
sunnypilot-byd/opendbc_repo/opendbc/safety/modes/volkswagen_mqb.h
T
github-actions[bot] de77c89cf6 sunnypilot v2026.002.000
version: sunnypilot v2026.002.000 (staging)
date: 2026-07-21T07:44:02
master commit: 2c334ede443d7391d27575af8c854a095ba702a8
2026-07-21 07:44:02 +00:00

190 lines
8.0 KiB
C

#pragma once
#include "opendbc/safety/declarations.h"
#include "opendbc/safety/modes/volkswagen_common.h"
static safety_config volkswagen_mqb_init(uint16_t param) {
// Transmit of GRA_ACC_01 is allowed on bus 0 and 2 to keep compatibility with gateway and camera integration
// MSG_LH_EPS_03: openpilot needs to replace apparent driver steering input torque to pacify VW Emergency Assist
static const CanMsg VOLKSWAGEN_MQB_STOCK_TX_MSGS[] = {{MSG_HCA_01, 0, 8, .check_relay = true}, {MSG_GRA_ACC_01, 0, 8, .check_relay = false}, {MSG_GRA_ACC_01, 2, 8, .check_relay = false},
{MSG_LDW_02, 0, 8, .check_relay = true}, {MSG_LH_EPS_03, 2, 8, .check_relay = true}};
static const CanMsg VOLKSWAGEN_MQB_LONG_TX_MSGS[] = {{MSG_HCA_01, 0, 8, .check_relay = true}, {MSG_LDW_02, 0, 8, .check_relay = true}, {MSG_LH_EPS_03, 2, 8, .check_relay = true},
{MSG_ACC_02, 0, 8, .check_relay = true}, {MSG_ACC_06, 0, 8, .check_relay = true}, {MSG_ACC_07, 0, 8, .check_relay = true}};
static RxCheck volkswagen_mqb_rx_checks[] = {
{.msg = {{MSG_ESP_19, 0, 8, 100U, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }, { 0 }}},
{.msg = {{MSG_LH_EPS_03, 0, 8, 100U, .max_counter = 15U, .ignore_quality_flag = true}, { 0 }, { 0 }}},
{.msg = {{MSG_ESP_05, 0, 8, 50U, .max_counter = 15U, .ignore_quality_flag = true}, { 0 }, { 0 }}},
{.msg = {{MSG_TSK_06, 0, 8, 50U, .max_counter = 15U, .ignore_quality_flag = true}, { 0 }, { 0 }}},
{.msg = {{MSG_MOTOR_20, 0, 8, 50U, .max_counter = 15U, .ignore_quality_flag = true}, { 0 }, { 0 }}},
{.msg = {{MSG_MOTOR_14, 0, 8, 10U, .ignore_checksum = true, .ignore_counter = true, .ignore_quality_flag = true}, { 0 }, { 0 }}},
{.msg = {{MSG_GRA_ACC_01, 0, 8, 33U, .max_counter = 15U, .ignore_quality_flag = true}, { 0 }, { 0 }}},
};
volkswagen_common_init();
#ifdef ALLOW_DEBUG
volkswagen_longitudinal = GET_FLAG(param, FLAG_VOLKSWAGEN_LONG_CONTROL);
#else
SAFETY_UNUSED(param);
#endif
return volkswagen_longitudinal ? BUILD_SAFETY_CFG(volkswagen_mqb_rx_checks, VOLKSWAGEN_MQB_LONG_TX_MSGS) : \
BUILD_SAFETY_CFG(volkswagen_mqb_rx_checks, VOLKSWAGEN_MQB_STOCK_TX_MSGS);
}
static void volkswagen_mqb_rx_hook(const CANPacket_t *msg) {
if (msg->bus == 0U) {
// Update in-motion state by sampling wheel speeds
if (msg->addr == MSG_ESP_19) {
// sum 4 wheel speeds
int speed = 0;
for (uint8_t i = 0U; i < 8U; i += 2U) {
int wheel_speed = msg->data[i] | (msg->data[i + 1U] << 8);
speed += wheel_speed;
}
// Check all wheel speeds for any movement
vehicle_moving = speed > 0;
}
// Update driver input torque samples
// Signal: LH_EPS_03.EPS_Lenkmoment (absolute torque)
// Signal: LH_EPS_03.EPS_VZ_Lenkmoment (direction)
if (msg->addr == MSG_LH_EPS_03) {
update_sample(&torque_driver, volkswagen_mlb_mqb_driver_input_torque(msg));
}
if (msg->addr == MSG_TSK_06) {
// When using stock ACC, enter controls on rising edge of stock ACC engage, exit on disengage
// Always exit controls on main switch off
// Signal: TSK_06.TSK_Status
int acc_status = (msg->data[3] & 0x7U);
bool cruise_engaged = (acc_status == 3) || (acc_status == 4) || (acc_status == 5);
acc_main_on = cruise_engaged || (acc_status == 2);
if (!volkswagen_longitudinal) {
pcm_cruise_check(cruise_engaged);
}
if (!acc_main_on) {
controls_allowed = false;
}
}
if (msg->addr == MSG_GRA_ACC_01) {
// If using openpilot longitudinal, enter controls on falling edge of Set or Resume with main switch on
// Signal: GRA_ACC_01.GRA_Tip_Setzen
// Signal: GRA_ACC_01.GRA_Tip_Wiederaufnahme
if (volkswagen_longitudinal) {
bool set_button = GET_BIT(msg, 16U);
bool resume_button = GET_BIT(msg, 19U);
if ((volkswagen_set_button_prev && !set_button) || (volkswagen_resume_button_prev && !resume_button)) {
controls_allowed = acc_main_on;
}
volkswagen_set_button_prev = set_button;
volkswagen_resume_button_prev = resume_button;
}
// Always exit controls on rising edge of Cancel
// Signal: GRA_ACC_01.GRA_Abbrechen
if (GET_BIT(msg, 13U)) {
controls_allowed = false;
}
}
// Signal: Motor_20.MO_Fahrpedalrohwert_01
if (msg->addr == MSG_MOTOR_20) {
gas_pressed = ((GET_BYTES(msg, 0, 4) >> 12) & 0xFFU) != 0U;
}
// Signal: Motor_14.MO_Fahrer_bremst (ECU detected brake pedal switch F63)
if (msg->addr == MSG_MOTOR_14) {
volkswagen_brake_pedal_switch = GET_BIT(msg, 28U);
}
// Signal: ESP_05.ESP_Fahrer_bremst (ESP detected driver brake pressure above platform specified threshold)
if (msg->addr == MSG_ESP_05) {
volkswagen_brake_pressure_detected = GET_BIT(msg, 26U);
}
brake_pressed = volkswagen_brake_pedal_switch || volkswagen_brake_pressure_detected;
}
}
static bool volkswagen_mqb_tx_hook(const CANPacket_t *msg) {
// lateral limits
const TorqueSteeringLimits VOLKSWAGEN_MQB_STEERING_LIMITS = {
.max_torque = 300, // 3.0 Nm (EPS side max of 3.0Nm with fault if violated)
.max_rt_delta = 75, // 4 max rate up * 50Hz send rate * 250000 RT interval / 1000000 = 50 ; 50 * 1.5 for safety pad = 75
.max_rate_up = 4, // 2.0 Nm/s RoC limit (EPS rack has own soft-limit of 5.0 Nm/s)
.max_rate_down = 10, // 5.0 Nm/s RoC limit (EPS rack has own soft-limit of 5.0 Nm/s)
.driver_torque_allowance = 80,
.driver_torque_multiplier = 3,
.type = TorqueDriverLimited,
};
// longitudinal limits
// acceleration in m/s2 * 1000 to avoid floating point math
const LongitudinalLimits VOLKSWAGEN_MQB_LONG_LIMITS = {
.max_accel = 2000,
.min_accel = -3500,
.inactive_accel = 3010, // VW sends one increment above the max range when inactive
};
bool tx = true;
// Safety check for HCA_01 Heading Control Assist torque
if (msg->addr == MSG_HCA_01) {
int desired_torque = volkswagen_mlb_mqb_steering_control_torque(msg);
bool steer_req = GET_BIT(msg, 30U);
if (steer_torque_cmd_checks(desired_torque, steer_req, VOLKSWAGEN_MQB_STEERING_LIMITS)) {
tx = false;
}
}
// Safety check for both ACC_06 and ACC_07 acceleration requests
// To avoid floating point math, scale upward and compare to pre-scaled safety m/s2 boundaries
if ((msg->addr == MSG_ACC_06) || (msg->addr == MSG_ACC_07)) {
bool violation = false;
int desired_accel = 0;
if (msg->addr == MSG_ACC_06) {
// Signal: ACC_06.ACC_Sollbeschleunigung_02 (acceleration in m/s2, scale 0.005, offset -7.22)
desired_accel = ((((msg->data[4] & 0x7U) << 8) | msg->data[3]) * 5U) - 7220U;
} else {
// Signal: ACC_07.ACC_Folgebeschl (acceleration in m/s2, scale 0.03, offset -4.6)
int secondary_accel = (msg->data[4] * 30U) - 4600U;
violation |= (secondary_accel != 3020); // enforce always inactive (one increment above max range) at this time
// Signal: ACC_07.ACC_Sollbeschleunigung_02 (acceleration in m/s2, scale 0.005, offset -7.22)
desired_accel = (((msg->data[7] << 3) | ((msg->data[6] & 0xE0U) >> 5)) * 5U) - 7220U;
}
violation |= longitudinal_accel_checks(desired_accel, VOLKSWAGEN_MQB_LONG_LIMITS);
if (violation) {
tx = false;
}
}
// FORCE CANCEL: ensuring that only the cancel button press is sent when controls are off.
// This avoids unintended engagements while still allowing resume spam
if ((msg->addr == MSG_GRA_ACC_01) && !controls_allowed) {
// disallow resume and set: bits 16 and 19
if ((msg->data[2] & 0x9U) != 0U) {
tx = false;
}
}
return tx;
}
const safety_hooks volkswagen_mqb_hooks = {
.init = volkswagen_mqb_init,
.rx = volkswagen_mqb_rx_hook,
.tx = volkswagen_mqb_tx_hook,
.get_counter = volkswagen_mqb_meb_get_counter,
.get_checksum = volkswagen_mqb_meb_get_checksum,
.compute_checksum = volkswagen_mqb_meb_compute_crc,
};