printer.cfg modified - 19/04/25 - 14:53:17

2025-04-19 14:53:21 +10:00
1 parent 603164f3b7
commit 3d4e5b1ffd
@@ -56,132 +56,6 @@ enable_force_move: True
 [gcode_arcs]
 resolution: 0.1

-#####################################################################
-# 	Bed Heater
-#####################################################################
-
-[heater_bed]
-##	SSR Pin - BED_OUT
-heater_pin: PA1
-sensor_type: Generic 3950
-sensor_pin: PF3
-##	Adjust Max Power so your heater doesn't warp your bed
-max_power: 1.0
-min_temp: 0
-max_temp: 125
-#control: pid
-#pid_kp: 58.437
-#pid_ki: 2.347
-#pid_kd: 363.769
-
-#####################################################################
-# 	Fan Control
-#####################################################################
-
-[fan]
-##	Part Cooling Fan - CPAP 7040
-pin: PG15
-max_power: 1.0
-kick_start_time: 0.05
-hardware_pwm: False
-cycle_time: 0.005
-off_below: 0.1
-
-
-[controller_fan stepper_fan]
-##	Controller fan - CNC_FAN2
-pin: PD12
-max_power: 0.9
-kick_start_time: 0.5
-fan_speed: 0.7
-
-[controller_fan electronic_chamber_fans]
-##	Controller fan - CNC_FAN2
-pin: PD13
-max_power: 0.8
-kick_start_time: 0.5
-fan_speed: 0.4
-
-
-[temperature_fan exhaust_fan]
-pin: PE5
-shutdown_speed: 0.0
-kick_start_time: 5.0
-cycle_time: 0.05
-hardware_pwm: True
-off_below: 0.15
-
-sensor_type: temperature_combined
-sensor_list: temperature_sensor _chamber_1, temperature_sensor _chamber_2, temperature_sensor _chamber_3, temperature_sensor _chamber_4
-combination_method: mean
-maximum_deviation: 999
-
-control: pid
-pid_Kp: 35.0
-pid_Ki: 12
-pid_Kd: 4.0
-pid_deriv_time: 2.0
-
-target_temp: 50.0
-min_temp: 0
-max_temp: 110
-min_speed: 0.149
-max_speed: 1.0
-
-gcode_id: C
-
-[gcode_macro M141]
-gcode:
-    {% set s = params.S|default(0)|float %}
-    SET_TEMPERATURE_FAN_TARGET temperature_fan="exhaust_fan" target={s}
-
-[fan_generic nevermore_fan]
-pin: PD15
-max_power: 1.0
-kick_start_time: 1.0
-cycle_time: 0.05   
-off_below: 0.13    
-
-#####################################################################
-# 	LED Control
-#####################################################################
-
-#[output_pin caselight]
-# Chamber Lighting - HE1 Connector (Optional)
-#pin: PB11
-#pwm:true
-#shutdown_value: 0
-#value:1
-#cycle_time: 0.01
-
-[output_pin daylight]
-pin: PB11
-pwm: True
-cycle_time: 0.01
-
-#--------------------------------------------------------------------
-
-[neopixel front_logo]
-
-pin: PB0
-#   The pin connected to the neopixel. This parameter must be
-#   provided.
-chain_count: 7
-#   The number of Neopixel chips that are "daisy chained" to the
-#   provided pin. The default is 1 (which indicates only a single
-#   Neopixel is connected to the pin).
-color_order: GRB
-#   Set the pixel order required by the LED hardware (using a string
-#   containing the letters R, G, B, W with W optional). Alternatively,
-#   this may be a comma separated list of pixel orders - one for each
-#   LED in the chain. The default is GRB.
-initial_RED: 1.0
-initial_GREEN: 0.0
-initial_BLUE: 0.0
-initial_WHITE: 0.0
-#   See the "led" section for information on these parameters.
-#--------------------------------------------------------------------
-
 #####################################################################
 # 	Homing and Gantry Adjustment Routines
 #####################################################################